• The SGD-TC board takes it’s power from the host SGD. Connect the 14-way connector IDC socket to the SGD, as shown below.
• The thermocouple is wired to the TC+ (green) and TC- (white) via the screw terminal block.
• The system can be powered via the USB port at the SGD.

This add-on module interfaces directly with any PanelPilot-compatible display. It has built-in cold-junction compensation (CJC) and takes it’s power directly from the SGD meter.

This thermocouple temperature add-on module interfaces directly with compatible PanelPilot M series displays. Any K, J or T-type thermocouple can be connected using screw terminals. It features built-in cold-junction compensation and takes its power directly from the SGD meter. Please note: the SGD ADPT-TC does not include a PanelPilot M series display.

The SGD-TC should be mounted seperately from the SGD display module using the two mounting holes. Take care to observe correct polarity when connecting the power supply and the thermocouple.