Kester 282 Solder Wire - Rosin Core, Leaded/Lead Free
282 Flux-Cored Wire
Kester 282 Mildly Activated Rosin Flux Core consists of high-quality Grade WW rosin, to which a very small amount of an extremely effective activating agent has been incorporated. 282 is classified as Type ROL1 flux under the IPC ANSI/J-STD-004 Joint Industry Standard. It was formerly classified as Type RMA per MIL-F-14256. 282 Rosin-Cored solder has been developed for use in the electronics industry where a more active flux than plain rosin is required but where highly activated fluxes are considered potentially conductive. Rosin Core 282 has a particular application where difficult assemblies are to be soldered, but the flux residue must be electrically inert.
Performance Characteristics
- Non-corrosive, moisture and fungus resistant, and non-conductive
- Low residue
- Classified as ROL1 per J-STD-004B
Cleaning
Since the rosin residue is dry and practically inert after soldering, the surface is insulated for atmospheric corrosion. Residue removal is usually not required, but if necessary for appearance or utility reasons, the rosin residue can be completely removed with Kester 5240 Rosin Residue Remover.