| General Specifications |
| Model |
UTP-50 |
| Printer Type |
Thermal (line dot) RS232 line printer |
| Scales supported |
Any IWTI scale or balance with RS232 printing |
| Characters per line and Font Size |
Character size: 8x12, 10x16, 12x20, 14x24, 32x48, and loadable |
| Print Speed |
Up to 50 mm / sec, nomina |
| Media Change |
Fast and Easy - pen lid, drop-in, close lid. |
| Noise in operation |
Quiet - paper advance motor only. |
| Supplies Required |
Media only |
| Media Supported |
Dot Matrix (2 ply) |
| Operating Environment |
Operating: 5° to 40°C, RH 35-85% (no-frost)
Storage: -20° to 60°C, RH 10-90% (no-frost) |
| Dimensions |
4.2 x 8 x 3.5 inches, 106 x 180 x 88 mm |
| Weight |
0.9 lbs (400 g) |
| RS232 Settings |
9600, N, 8, 1 - standard Intelligent Weighing
Technology ship setting.
Also available: Baud (1200-19200), Data bits (7,8)
Start bit (1), Parity (N,E,O), FC (DTR-printer busy) |
| Power |
12V AC/DC adapter
Not available in battery version |
| Media Size |
Paper (7yr), 2 ¼" (58mm) wide x 82ft/roll |
| Use of other media types and suppliers. |
Most commercial (right sized)
good quality impact print paper may be suitable. 83 mm max diameter, core ID 12mm +/- 1mm
Total thickness, 0.13 mm or less
Other roll label media may damage printer mechanism and void manufactures warranty. |
| ANY printer purchased with ANY Intelligent Weighing Technology RS232 scale or balance – will be setup, configured, cabled, and tested as system. See PRINTER TO SCALE Configuration for more details. |