Channels: 2 Bandwidth: DC~150MHz(-3dB) Rise Time: 2.3ns Approx. Sensitivity: 2mV/div ~ 10V/div (1-2-5 increments) Accuracy: ±(3% x |Readout| + 0.1 div + 1mV) Input Coupling: AC, DC & Ground Input Impedance: 1MO±2%, ~15pF Polarity: Normal & Invert Maximum Input: 300V (DC+AC peak), CATII Waveform Signal Process: + , - , x, FFT, FFTrms Offset Range: 2mV/div ~ 50mV/div: ?0.4V100mV/div ~ 500mV/div: ?4V1V/div ~ 5V/div: ?40V10V/div: ?300V Bandwidth Limit: 20MHz (-3dB) Sources: CH1 , CH2 , Line , EXT Modes: Auto, Normal, Single, TV, Edge, Pulse Width Coupling: AC , DC , LF rej. , HF rej. , Noise rej. Sensitivity: DC ~ 25MHz: Approx. 0.5div or 5mV;25MHz ~ 150MHz: Approx. 1.5div or 15mV Range: ?15V Sensitivity: DC ~ 25MHz : ~ 50mV ; 25M ~ 150MHz : ~100mV Input Impedance: 1MO?2% , ~ 15pF Maximum Input: 300V (DC AC peak) , CATII Range: ±15V Modes: Auto, Normal, Single, TV, Edge, Pulse Width Accuracy: ±(3% x |Readout| + 0.1 div + 1mV) Pre-Trigger: 10 div maximum Post-Trigger: 1000 div X-Axis Input: Channel 1 Y-Axis Input: Channel 2 Phase Shift: ±3°at 100kHz Real-Time Sample Rate: 1GSa/s maximum Equivalent Sample Rate: 25GSa/s maximum Vertical Resolution: 8 Bits, 2 Mega Points maximum Acquisition Mode: Normal, Peak Detect, Average Peak Detection: 10ns (500ns/div ~ 10s/div) Average <</td>: 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 Voltage Measurement: Vpp ,Vamp ,Vavg ,Vrms ,Vhi ,Vlo ,Vmax ,Vmin ,Rise Preshoot/Overshoot ,Fall Preshoot/Overshoot Time Measurement: Freq ,Period ,Rise Time ,Fall Time ,Positive Width ,Negative Width ,Duty Cycle Cursors Measurement: Voltage difference between cursors (V) Time difference between cursors (T) Auto Counter: Resolution : 6 digits Accuracy: 2% Signal Source: All available trigger source except the Video trigger mode Frequency Range: 1kHz ~ 100kHz, 1kHz/STEP Duty Cycle Range: 5% ~ 95%, 5%/STEP Autoset: Adjust Vertical VOLT/DIV, Horizontal TIME/DIV, and Trigger level automatically Save Setup: Up to 15 sets of measurement conditions Save Waveform: 15 sets of waveform TFT LCD Type: 5.6 inch Display Resolution: 234(Vertically) x 320(Horizontally) Dots Display Graticule: 8 x 10 divisions Display Brightness: Adjustable USB Slave Connector: USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) SD Card Slot: Image (BMP), waveform data (CSV), and setup (SET) Line Voltage Range: AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection Multi-Language Menu: Available Onscreen Help: Available |