Channels: 2 Bandwidth: DC~100MHz(-3dB) Rise Time: 3.5ns Approx. Sensitivity: 2mV/div ~ 10V/div (1-2-5 increments) Accuracy: ±(3% x |Readout|+0.1 div + 1mV) Input Coupling: AC, DC & Ground Input Impedance: 1M±2%, ~16pF Polarity: Normal & Invert Maximum Input: 300V (DC+AC peak), CATII Waveform Signal Process: + , - , x, FFT Offset Range: 2mV/div ~ 50mV/div : ±0.4V 100mV/div ~ 500mV/div : ±4V 1V/div ~ 5V/div : ±40V Bandwidth Limit: 20MHz (-3dB) Sources: CH1 , CH2 , Line , EXT Modes: Auto, Normal, Single, TV, Edge, Pulse Width Coupling: AC , DC , LF rej. , HF rej. , Noise rej. Sensitivity: DC ~ 25MHz: Approx. 0.5div or 5mV;25MHz ~ 100MHz: Approx. 1.5div or 15mV Range: ±15V Sensitivity: DC ~ 30MHz : ~ 50mV ; 30M ~ 60MHz : ~100mV Input Impedance: 1MO?2% , ~ 15pF Maximum Input: 300V (DC AC peak) , CATII Range: 1ns/div ~ 10s/div (1-2.5-5 increments); ROLL : 250ms/div ~ 10s/div Modes: Main, Window, Window Zoom, Roll, X-Y Accuracy: ±0.01% Pre-Trigger: 10 div maximum Post-Trigger: 1000 div X-Axis Input: Channel 1 Y-Axis Input: Channel 2 Phase Shift: ±3° at 100kHz Real-Time Sample Rate: 250MSa/s maximum Equivalent Sample Rate: 25GSa/s maximum Vertical Resolution: 8 Bits2Mega Points maximum Acquisition Mode: Normal, Peak Detect, Average Peak Detection: 10ns (500ns/div ~ 10s/div) Average <</td>: 2 , 4 , 8 , 16 , 32 , 64 , 128 , 256 Voltage Measurement: Vpp ,Vamp ,Vavg ,Vrms ,Vhi ,Vlo ,Vmax ,Vmin ,Rise Preshoot/Overshoot,Fall Preshoot/Overshoot Time Measurement: Freq ,Period ,Rise Time ,Fall Time ,Positive Width ,Negative Width ,Duty Cycle Cursors Measurement: Voltage difference between cursors (V)Time difference between cursors (T) Auto Counter: Resolution : 6 digits Accuracy : ±2% Signal Source: All available trigger source except the Video trigger mode Frequency Range: 1kHz ~ 100kHz, 1kHz/STEP Duty Cycle Range: 5% ~ 95%, 5%/STEP Autoset: Automatically adjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level Save Setup: Up to 15 sets of measurement conditions Save Waveform: 15 sets of waveform TFT LCD Type: 5.6 inch Display Resolution: 234(Vertically) x 320(Horizontally) Dots Display Graticule: 8 x 10 divisions Display Brightness: Adjustable USB Slave Connector: USB1.1 & 2.0 full speed compatible (printers and flash disk not supported) SD Card Slot: Image (BMP), waveform data (CSV), and setup (SET) Line Voltage Range: AC 100V ~ 240V , 48Hz ~ 63Hz , Auto selection Multi-Language Menu: Available Onscreen Help: Available |