CW-301 Water-Soluble Flux-Core Wire Solder (SAC305, 0.032-inch, 1 lb Spool)
Flux-Cored Wire
Indium Corporation uses only “conflict-free” and grade A (per ASTM B32) metals, as well as other high purity metals for its flux-cored wire. Our materials have been tested and certified to meet IPC J-STD-004B and other relevant industry specifications, including the legacy military specification QQ-S-571f. Indium Corporation’s flux-cored wire is well known for its:
- Void-free
- Evenly layer winding
- Low oxide shiny appearance over time
- Non-offensive odor for the 800 series and 200 series fluxes
- CW-301 Water-Soluble Cored Wire
CW-301 Wire Solder is cored with a high-reliability water-soluble flux that is compatible with Indium Corporation’s full line of Pb-free soldering materials. It provides excellent solder spread with minimal smoking and low odor. The fast wetting speed is beneficial in minimizing rework cycle time which is typically longer with Pb-free solders.
Residue Removal
The flux in CW-301 is formulated for use in water-wash assembly processes. The post-soldering flux residue should be removed as soon as possible after soldering. The residue may be readily cleaned in conventional equipment without the use of saponifiers or detergents. It is important that the cleanliness of boards and components are thoroughly checked after soldering and cleaning. Deionized water is recommended for final rinse.
Shelf Life
When stored in a cool, dry environment, there is no reason that Indium Corporation’s CW-301 cannot retain its intended soldering properties for many years. The main causes of degraded cored wire reflow performance are the buildup of a thick oxide layer on the surface of the wire, caused by prolonged exposure to higher than normal temperature and humidity conditions, or the buildup of lead carbonate on high-lead (>85%) alloy-cored wire shipped or stored under very high humidity conditions.