IDEAL Networks TRADE161004 LanTEK III - Trade-In to 1000 MHz Data Cable Certifier
1000 MHz cable certifier for TIA/EIA category 7/7A - ISO class F/Fa including Cat 6A Permanent Link adapters
- IDEAL AnyWARE app - Send test data from anywhere
- New troubleshooting features that save time and money
- New permanent link adapter saves money
- Industry leading battery life - 18 hours
- IDC test data software to create professional reports
The LanTEK III is an easy to use cable certifier that meets existing TIA and ISO/IEC performance requirements for testing up to Cat 7A/1000MHz. FiberTEK III adapters are used with LanTEK III for fast and simple certification of high bandwidth single-mode and multimode fiber optic cabling including support for encircled flux testing.
Test data when you want it, where you want it
Using the free IDEAL AnyWARE app, field technicians can share test data with colleagues or customers without leaving the job site, resulting in greater collaboration, more on-time job completions and reduced costs.
New troubleshooting features that save time and money
Should a cable prove to be faulty, troubleshooting is easy with the introduction of Time Domain Return Loss (TDRL) and Time Domain Near End Cross Talk (TDNEXT) measurements. To pinpoint fiber cabling faults every FiberTEK III adapter includes a built-in visible light source to help you visually pinpoint faults and locate fiber ports. These additional features help locate hidden connections, splices and cable faults and can save many hours previously spent troubleshooting problems on the job.
New permanent link (PL) adapter saves money
New PL adapters reduce down time and lower maintenance costs with field replaceable RJ45 contacts that eliminate the need to replace the complete adapters. New PL adapters feature centered connectors to ensure compatibility with all brands of Cat 6A/ ISO Class E A cabling solutions. The PL adapters use high performance, ultra-flexible cable that allows them to be used in confined spaces without damaging the PL adapter or the outlet being tested.
Modular solution to reduce capital costs
For many cable installers there is pressure to reduce capital equipment costs. The LanTEK III and FiberTEK III uniquely offer a pick and mix solution of components, therefore you only pay for what you need. This includes a wide range of test modules, accessories and Careplans to satisfy your specific requirements.
Efficient Data Management Software
IDEAL Data CENTER (IDC) is the free test result management software for the LanTEK III and FiberTEK III series of cable certifiers. IDC allows data cable installation professionals to easily download, manage, edit and print PDF reports. IDC o ers a simple user interface with time saving features including:
- Microsoft ribbon toolbars for ease of use
- Only 4 button clicks to import data from the tester
- >10,000 results managed in a single job
- Professional reporting for your clients
- Ability to group and filter test results into categories including:
- Test limits
- Devices
- Or any other data within the database
Professional Reporting
Automatically generate test reports in PDF or CSV format. The summary page of each report can be customized to include logo, company and operator details.
Choose between 3 different reports than can show either passed, failed or all test results in each report:
New Permanent Link (PL) adapter
Operates in the smallest enclosures
The PL adapters use high performance, ultra-flexible cable that allows them to be used in confined spaces without damaging the PL adapter or the outlet being tested.
Compatible with all RJ45 cabling systems
New PL adapters feature centered connectors to ensure compatibility with all brands of Cat6A/ISO Class EA cabling solutions.
Field replaceable tips that reduce downtime and maintenance costs
New PL adapters reduce down time and lower maintenance costs with field replaceable RJ45 tips that eliminate the need to replace the complete adapters. To reduce costs the PL adapter tips provide almost three times as many insertions than a regular patch cord before tip replacement is required. Through innovative design, the entire worn plug assembly is replaced with a completely new plug, contact and locking mechanism.
| |
IDEAL Networks’ PL adapter tip (independently verified) |
Regular RJ45 patch cord plug rated by ISO/TIA standards |
| Number of insertions before contacts are worn and replacement is required |
2,000 |
750 |
The PL adapter tips can be changed in minutes with 3 simple steps.
New troubleshooting features that save time and money
Should a cable prove to be faulty, troubleshooting is easy with the introduction of Time Domain Return Loss (TDRL) and Time Domain Near End Cross Talk (TDNEXT) measurements. These additional features help locate hidden connections, splices and cable faults and can save many hours previously spent troubleshooting problems on the job.
TDX – Example: Consolidation Point
Network Tester Selection Guide
| |
VDV II Basic |
VDVII Plus/Pro |
NaviTEK NT |
LanXPLORER Pro |
SignalTEK CT |
SignalTEK NT |
LanTEK III |
| Cable Verification |
| Advanced Wiremap Test |
• |
• |
• |
• |
• |
• |
• |
| Length to Open |
|
Plus |
• |
• |
• |
• |
• |
| TDR Length to Short/Fault |
|
Pro |
• |
• |
• |
• |
• |
| Fiber Optic Ready |
|
|
Pro |
• |
|
• |
• |
| Performance Testing to Standards |
| IEEE Cable Transmission Performance Test |
|
|
|
|
• |
• |
|
| IEEE Performance Test through Live Networks |
|
|
|
|
|
• |
|
| TIA-568/ISO 11801 Cable Certification |
|
|
|
|
|
|
• |
| Fiber Optic Performance Test |
|
|
|
|
|
Optional |
Optional |
| Stores & Generates Test Reports |
|
|
Plus & Pro |
• |
• |
• |
• |
| IDEAL AnyWARE app to import reports to phone |
|
|
Plus & Pro |
• |
• |
• |
• |
| Tracing & Connectivity |
| Tone Generator (audible trace) |
• |
• |
• |
• |
• |
• |
• |
| Flash Hub/Switch Link LED (visual trace) |
|
• |
• |
• |
|
• |
|
| Ethernet Service Detection |
|
Pro |
• |
• |
|
• |
|
| Checks for available PoE, Reports Volts & Pairs |
|
Pro |
• |
• |
|
• |
|
| Reports Watts/Volts/Amps Available to PoE Device |
|
|
|
• |
|
• |
|