• Part number 99-0436
• Dual head flying probe interface for true point-to-point testing
• Includes Tracker 3200S and rack mounted computer inside device
• Maximum board size: 27 x 23"
• Maximum probing area: 19 x 12”

The Huntron Access DH2 Prober is a dual head Robotic Flying Probe system that is best suited for low volume PCA testing where interfacing between two points is necessary. The Access DH2 stands in it's own cabinet with plenty of space underneath for a rack mounted PC and other test instrumentation. The open architecture design of the Access DH2 makes it possible for you to utilize flying probe technology with many different test methods where automated probing of the PCA under test makes sense. The Access DH2 can be used with traditional Huntron Tracker products, configured to work with many conventional test instruments. The Access DH2 design allows a plug and play approach to automating manual guided probe applications.

The Huntron Workstation software supports Huntron Trackers (Tracker Model 30 and Tracker 3200S) and selected conventional test instruments, including:

• B&K Precision 2841 DC Resistance Meter
• Agilent/Keysight 34461A DMM
• Agilent/Keysight 34410A DMM
• Tektronix 4050 DMM
• Agilent DSO1022A oscilloscope
• Keysight DSOX2022A oscilloscope
• Keysight N9935A spectrum analyzer (with Access RF)
• Keysight N9938A spectrum analyzer (with Access RF)
• Rohde & Schwarz FSH4 spectrum analyzer (with Access RF)

Other test instrumentation can be connected to an Access Prober and controlled using Huntron Remote Control or custom applications developed using the Hardware SDK.

Huntron offers several versions of its Access probers.

The main difference between the Access and Access 2 is size. The Access Prober is sized for small to medium dimension PCBs while the Access 2 Prober can handle larger PCBs. The Access 2 has additional vertical space to handle taller features on a PCB.

The dual head Access DH2 allows you to probe between two specific points whereas the single head prober requires a common connection used for the "return" line. The Access DH2 was designed as an open architecture system where the user can setup testing processes of their own design. The Access DH2 is built on its own cabinet with space underneath for additional test equipment.

There is also an Access RF which is a modified version of the Access 2 and is used for precise near field RF measurements. The standard probe holder that uses spring probes has been replaced with a special holder for a high quality Langer RF probe. The Access RF is also available with or without a spectrum analyzer.