Hioki 3490 Analog MΩ HiTester 3-Range

Analog MΩ HiTester

• Resistance measurement - 3Ω, 30Ω
• AC voltage measurement: 600V AC
• Approx. 20 hours continuous operating time
• Drop Proof: on concrete: 1m/1 time
• Dielectric strength: 5312 VAC, 50/60Hz

The Hioki 3490 Analog MΩ HiTester's 3 Ω range can be used for both the ContinuityTest on protective conductors used in electrical installations of buildings, and the protective conductor resistance measurement test ap-proved by IEC60364. The 30 Ω range is also optimal for the Polarity and Circuit ConnectionTesting for Indoor Wiring approved by AS/NZS3017, guidelines for tests and inspections on electrical installations in the Oceania region. This instrument is not designed for the production line and is not suitable for that purpose. Please use the 3154 Digital MΩ HiTester for the production line.

Built for the field

See better in the dark.

Work safely knowing that when the RED is lit, live wires, high voltage or electrical discharge is present. The super bright light at the tip of the optional 9788 Test Leads adds to efficiency.

Be well-informed about the condition of your batteries.

Green signals that the battery level is sufficiently high

Red warns of low battery power.

Replace the batteries before the LED turns completely off.

The LIVE CIRCUIT LED will light up in red whenever the voltage exceeds 20V AC between the LINE and EARTH terminals, and when at least 20V DC is still remaining during the auto discharge.

Remote control switch

• Start and stop the test at the touch of a button
• Test for insulation resistance single-handedly

• Illuminate the test location with a bright white LED

Testers are built tough to withstand a 1-meter drop onto a concrete floor.

Ergonomic design lets you start and stop tests with a single press.

Simply flip the switch to measure continuously

Models Hioki IR 4016-20, IR 4017-20, IR 4018-20 Analog HiTester Single Range

Model Hioki 3490 Analog HiTester 3-Range Insulation & Continuity