Standards:

• UL 508 Type 12
• CSA Type 12
• Complies with:
   NEMA Type 12
   JIC EGP-1-1967
   IEC 60529, IP54

Construction:

• Formed 10 gauge steel.
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Body stiffeners are provided in enclosures for extra rigidity.
• Reinforced eyebolts are provided for easy enclosure lifting.
• Double door openings have gasketed overlapping doors, eliminating the need for a center post.
• Continuously hinged doors may be removed by pulling the hinge pin
• Doors are secured with a three point latch and operated with a vault type padlocking handle.
• Latch rods are equipped with rollers for easier door closing.
• Oil resistant gaskets are permanently secured and mechanically retained.
• Removable 10 gauge inner panels are included in the enclosures.
• 3 door units have 2 panels (34" x 78" and 70" x 78").
• 4 door units have 2 panels (70" x 78" each).
• 5 door units have 3 panels (one 34" x 78" and two 70" x 78")
• Slave doors have mechanical interlock and cannot be opened unless the master door is open.
• Panel supports are provided in enclosures for easy panel installation.
• Collar studs are provided for mounting inner panels.
• A grounding stud is provided in the enclosure for each door and a bonding stud is provided on the door.
• A literature pocket is provided for the inside of the door.

Finish:

• Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside.
• Removable inner panel is finished in white powder coating.

Accessories:

• Air conditioners
• Blowers
• Breather kits
• Door stop kits
• Drip shield kits
• Enclosure stabilizers
• Filter fans
• Floor stand kits
• Gland plates
• Heaters
• Light kit
• Louvered ventilating plates
• Thermostats
• Window kits