SOLAR I-Ve allows both testing a single-phase (three-phase with optional MPP300) photovoltaic system and verifying I-V curve. Thanks to remote unit SOLAR02, it is possible to test the system complying with the requirement of simultaneity as provided for by the reference standard. SOLAR02 is a datalogger which, synchronized with SOLAR I-Ve, acquires the data relevant to irradiation and temperature while tests carried out by SOLAR I-Ve are carried out. For measuring I-V curve, SOLAR I-Ve manages an internal database of the modules, which can be updated at any time by the user by comparing the measured data with the rated values, thus allowing the immediate evaluation whether the string or the module fulfills the efficiency parameters declared by the manufacturer. Current and voltage measurement at modules/strings output is measured with the 4-terminal method, which allows extending possible measuring cables without considering any compensation of their resistance, thus obtaining always precise measurements. At the end of the test, the display of I-V curve on the screen is a clear indication about the compliance with the specifications declared by the panel manufacturer.

Check Single phase PV installations

• DC voltage and current measurements (1000V for SOLAR I-Vw 1500V for SOLAR I-Ve)
• AC TRMS voltage and current measurements
• DC/AC power measurement
• Solar irradiation [W/m 2 ] measured by use of reference cell connected to unit SOLAR-02
• Module and environ. temp. measurement by means of probe connect to SOLAR-02
• Use of compensation relationships on PDC measurements
• Immediate evaluation of result OK/NO of a test
• Checks with programmable IP from 5s to 60min

Testing single/three-phase PV systems

• Measurement of 3 DC voltages and currents
• Measurement of DC string power and total DC power
• Measurement of 3 AC TRMS voltages and currents
• Measurement of total AC power
• Measurement of irradiation [W/m 2 ] by means of a reference cell connected to SOLAR-02
• Module and environ. temp. measurement by means of probe connect to SOLAR-02
• Application of compensation relationships to DC efficiency.
• Immediate evaluation of result OK/NO of a test
• Parameter recording of a PV system with 5s to 60min programmable IP

I-V Curve measurement

• Voltage, current, power of PV module/string 1000VDC, 15ADC (SOLAR I-Vw, I-V400w)
• I-V/power module/string 1500VDC-10ADC or 1000VDC-15ADC (SOLAR I-Ve, I-V500w)
• Activation of manual or automatic measurement
• PV module/string temperature measurement
• Irradiance measurement [W/m 2 ] by using reference cell
• Numerical and graphical results of I-V curve with 4-wire method
• Comparison of results with standard conditions (STC) and OK/NO final response
• Internal customizable database for definition up to 30 PV modules
• Annual degradation evaluation of PV modules/strings/fields
• Internal memory for saving test and Optical/USB interface for PC connection

Quick Check

• Fast test of open voltage and short circuit current up to 1000V DC, 15A (SOLAR I-Vw, I-V400w) and up to 1500VDC, 15A (SOLAR I-Ve, I-V500w)
• Activation of manual or automatic measurement
• Immediate evaluation (OK/NO) of test results

I-V Curve and much more

With your mobile device, HTANALYSIS™ helps you to understand the problems you may have in PV Installations

I-V Curve, Easy, Fast and Lightweight.

• 128 points I-V Curve
• 1500V max voltage
• 15A* max current
• VOC and ISC
• Inverter Efficiency Measurement
• AutoStart Test
• Internal Module Database
• HTANALYSIS™ APP

Inverter efficiency Measurement

• AC Side and DC Side at the same time
• Voltage and Current
• Irrandiance and module temperature
• Power Lossing as measure result

Connect your sensors without any distance limits.

You can connect your irradiance sensor and temperature probe directly on your Solar I-Vw, but if you want to remotize the measurement you just need as remote unit the Solar02. When the Solar I-Vw and Solar02 are paired you can walk far even for 1 km. When you come back near the Solar I-Vw the Solar02 will upload the recorded data from the sensors directly to the master unit.

AutoStart Test. Check String by String without disconnect any cable.

Open the fuse box in the combiner box and start measure I-V Curve string by string, each measure (measure + data saving) needs no more then 15 seconds and no more then 1 people. Solar I-Vw starts automatically to measure the I-V Curve when your test leads touches the positive and negative poles. All that you need is KITKELVIN Test Leads accessory.

Module Database, from the cloud to your I-V Curve tracer

Connect via WiFi your tablet or smartphone and manage the modules in your I-V Curve tracer. You can add, modify or delete the modules stored in your device. All of those functions are available even on PC software TOPVIEW (included).

HTANALYSIS™, HTCLOUD™ and TOPVIEW.

You can have your measures on your PC directly from HTCLOUD™. All that you need is to take your smatphone or tablet in your hands, open the app HTANALYSIS™ and connect your I-V Curve Tracer via WiFi. In few gestures you can upload the data on HTCLOUD™ and in REAL TIME you can get the data on your PC with TOPVIEW software (included).