Wire Mapper Tester for LAN networks
QUICKLAN 6055 permits to perform quickly wire mapping test of LAN networks RJ45 twisted pair cables in compliance to EIA/TIA 568A/B. The meter check all eventual wrong connections (crossed, split, inverted couples, etc..), can detect problems of the cable itself (open circuits, short circuits) and shows results in a large custom display in very simple way. By using up to 8 numbered remote control units it’s also possible to detect the connection between the RJ45 sockets located in the working rooms and the ones located on the transposition panel or on the HUB. QUICKLAN 6055 is ideal for all installers who need an easy instrument for a preliminary LAN test.
QUICKLAN 6055 is an easy cable tester for LAN cables with RJ45 connector of whatsoever category. It’s able to detect cable failures and check wirings in UTP (Unshielded Twisted Pair) and STP (Shielded – screened shielded Twisted Pair) cables.
The instrument not only identifies wiring faults, such as open wires, shorted wires, miswires and split pairs, but also tests up to 8 different cables at one end thanks to eight different optional remote units.
INSTRUMENT DESCRIPTION
Front panel
|
CAPTION:
- RJ45 input terminal
- LCD display
- UTP key
- GO key
- Arrow keys
- ON/OFF key
- STP key
- Remote units #1 ~ #2
|
![]() |
Switch on of instrument
To switch on the instrument press the ON/OFF key. For an instant all display segments light up, then the firmware release appears on the top right side. When “on” is displayed the instrument is ready to start.
Selection of cable type
By pressing UTP or STP keys it’s possible to select the type of cable to be tested, with the following difference: STP performs also tests on the shield (continuity and proper connections) while UTP doesn’t.
Consequently STP must be pressed for all shielded cables such as:
- FTP (Foiled Twisted Pair cable)
- STP (Shielded Twisted Pair cable)
- SSTP (Shielded/Shielded Twisted Pair cable)
- SFTP (Shielded/Foiled Twisted Pair cable)