| General Specifications |
| Aggregation time (IP): |
1, 5, 10, 30, 60, 120, 300, 600 or 900s programmable |
| Inrush current acquiring threshold: |
programmable between 2A ÷ 90A and 5A ÷ 900A in steps of 1A |
| Inrush current detection modes: |
Fixed |
| Inrush current response times: |
1ms (peak), 16.7,20,50,100,150,200ms (max RMS value) |
| Memory capacity: |
2Mbytes |
| Interface to PC/mobile devices: |
WiFi |
| Recordings/Autonomy |
| Inrush current snapshots saving: |
max 20 (each with max 10 events) |
| Log + Snapshot saving: |
max 99 files |
| Sampling rate: |
128 sample/period (basic sample) |
| Max Rec autonomy (hours) |
ca 2.1 x IP. e.g: IP=60s →ca126hours → ca 5days |
| Mechanical characteristics |
| Dimensions /L x W x H): |
252 x 88 x 44mm |
| Weight (including battery): |
420g |
| Max conductor size: |
45mm |
| Mechanical protection: |
IP20 |
| Power supply |
| Battery type: |
2 batteries 1.5V type AAA IEC LR03 |
| Battery life: |
approx. 40h (continue use in "W" position) |
| Auto Power Off: |
approx. 5 minutes of idleness (disable) |
| Display |
| Characteristics: |
graphic dot matrix, 128x128pxl with backlight |
| Sample rate: |
128 samples/period (@ 50Hz) |
| Display update rate: |
1 time/sec |
| Conversion mode: |
TRMS |
| Climatic conditions |
| Reference temperature: |
23°C ± 5°C |
| Operating temperature: |
0°C ÷ 40 °C |
| Operating humidity: |
<80%RH |
| Storage temperature: |
-10°C ÷ 60°C |
| Storage humidity: |
<70%RH |
| Max height of use: |
2000m |
| Reference guidelines |
| Safety: |
IEC/EN 61010-1, IEC/EN61010-2-032 |
| EMC: |
IEC/EN61326-1, EN301489-17V3.1.1, EN301328V2.1.1 |
| Safety of test leads: |
IEC/EN61010-031 |
| Insulation: |
double insulation |
| Pollution level: |
2 |
| Measurement category: |
CAT IV 600V, CAT III 1000V to ground |
| See Data Sheet for Full Specifications |