• Basic Drain-Rooter PH - Power Cable Feed, 4 ft. Guide Hose, Drum, Variable Speed Motor w/Rev Switch, Water-Proof Air Foot Switch, Plastic Cartridge (no cable)
• Clears clogged sinks, tubs, and laundry drains in from 1-1/4" to 3" lines
• Variable speed power cable feed drives and retrieves cable at up to 16 ft. per minute
• Four-foot guide tube keeps hands and job site clean
• Pneumatic foot pedal controls motor speed

Clear clogged sinks, tubs, and laundry drains with less effort. Equipped with a variable-speed power cable feed and variable-speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier.

The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures, and messy floors. The drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through sink strainers or crossbars. The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome.

The Drain-Rooter PH also comes with the new Band-It splashguard to minimize excess water spray from the spinning drum.

The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome. The Drain-Rooter PH can be operated in both horizontal and vertical positions to get closer to the drain opening.

Quick Change Cable Cartridges make it easy to switch to a different diameter cable. You just loosen three screws, pull the front of the drum off and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one. The drain cleaning machine holds 50 ft. of 1/4" or 5/16", or 35 ft. of 3/8" Flexicore cables.

To switch to a different diameter cable (or even connect two 3/8" cables together), you just loosen three screws, pull the front of the drum off the cable, and load another cartridge. Changing takes less than a minute and turns what could be a messy job into a clean one - another way the Drain-Rooter PH is a clean machine.

The drum speed can be varied by changing the pressure on the foot pedal.

Heavy gauge wire is coiled around 49-strand wire rope and then heat treated. This cable has unequaled strength and the right amount of flexibility. It’s so tough, it has a one-year warranty against defects or breakage.

• Please see Cable Application Chart for Cable compatibility HERE
• Please See Cable and Cutter Guide HERE

Cutter set includes the following heads:

• AH - Arrowhead starting drill (gets water flowing)
• BG - Boring gimlet for removing loose objects
• DHBG - Down head boring gimlet for removing loose objects (goes down waste, not up stack)
• FAH - Flexible spring arrow head cutter starting drill (for sharp turns in small lines)
• 1-1/4 SCB - 1-1/4" side cutter blade for cutting and scraping

(*Included with packages PH-DR-B and PH-DR-C)

A great way to extend the life of drain cleaning tools & equipment. Snake-Oil Classic preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings, and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give the equipment a fresh, clean smell. Available in quarts or gallons.

Rip through tough stoppages with the unique ClogChopper multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.

¼” Flexicore Cables