• Basic Unit: 690cc Engine w/Electric Start (Battery NOT Included), 2500 psi/12 gpm Pump with Vibra-Pulse, 200 Gallon Holding Tank, 400 ft. Capacity Hose Reel w/Variable Speed Reel Control, Spray Wand (Hoses and nozzles sold separately)
• Powerful jet ideal for clearing large lines with high water flow
• 200 gallon holding tank carries enough water to handle remote jobs far from a water source
• 690 cc (24 hp) engine with low oil shutoff, and electric start
• Heavy-duty 2500 psi, 12 gpm triplex pump with Vibra-Pulse

The JM-2512 Typhoon trailer jet is ideal for clearing big lines or remote jobs far from a water source. Twelve gallons of water pulsates down the line every minute at a powerful 2500 psi to blast lines clear of grease, sediment, and debris. The 200-gallon holding tank carries enough water to handle remote applications where access to water is limited.

A 690 cc engine with electric start powers the 2500 psi, 12 gpm pump with Vibra-pulse® through a V-belt reducer. Two hose reels – an electric rewind jet hose reel with 400 ft. x 1/2” capacity featuring a variable speed controller, and a supply hose reel carrying 150 ft. x 3/4” hose – are mounted at the rear of the unit next to the pressure gauge and output valve. Engine controls, including an hour meter, are mounted within easy reach in the lockable toolbox with slide action doors just below the reels.

The JM-2512 Typhoon is mounted on a heavy-duty trailer rated for 3500 lbs. per axle with bearing buddies, and rides on 15” radial tires with modular wheels. A splash guard at the front protects the pump and engine from road debris. The body is protected by a durable powder-coated epoxy finish for added weather protection.

• Electric brakes
• Safety strobe light
• Three safety cones with holder
• Rear fold down stabilizer jacks
• Retractable guide arm
• Anti-freeze system protects the unit from freeze damage.
• Complete with spray wand and trigger.

General’s High-Performance Nozzles for the Typhoon trailer jet incorporate patented fluid mechanics that significantly increases the thrust, pulling power, and cleaning power of the nozzles without needing to increase the water flow or pressure. Other nozzles simply let the water churn around inside until it finds its way out the nearest orifice. High-Performance Nozzles are custom machined to redirect the water through highly efficient inner surface channels directed toward each orifice. The nozzles have replaceable threaded inserts at each orifice, so when the nozzle wears, you only have to replace the inserts, not the whole nozzle. A set of insets are a fraction of the cost of a replacement nozzle. See the Nozzle page for more information.

Tough high pressure jetting hose comes in a variety of lengths and diameters. Use 1/2″ ID hose for main lines and long runs 4″ through 12″ in diameter at distances of up to 400 ft. Use the 3/8″ ID hose for clean outs, 4″ through 8″ floor drains, and septic lines at distances up to 300 ft.

Get a spray wand and use your jet for high-pressure washing and cleaning applications. Spray wands are made from durable components. The triggers have a light touch, yet can withstand rough usage. The wands are insulated and designed for use with a downstream soap injector. A variety of stainless steel nozzles are available. (Catalog # SWA-2512).

Make sure you leave the lines crystal clear with General’s rotary nozzles. The JN-RB heavy-duty hardened stainless steel rotary nozzles have two 90 degree jets to scour the walls of the pipe, and two 35 degree jets to drive the hose down the line.

Rip through roots with the Chain Saw Nozzle. Lengths of chain can quickly and easily be switched for different diameter pipes. Spins at up to 10,000 RPM. 1/2″ nozzle works well in combination with the 12 gpm Typhoon trailer jet to clear 4″, 6″, 8″, and 10″ lines. (Catalog # J-CSN-15)

The Cart-Reel lets you use the power of gas jets in buildings and confined spaces where exhaust fumes can be dangerous. (Catalog # CM-300) Hose sold separately.

For use with any jet, the compact 200 ft. capacity Handy- Reel can be attached to a gas jet so you can use the power of the gas jet inside a building. (Catalog # HM-200-W) Hose sold separately.

The optional Foot Pedal gives you added safety. Water flows when you step on the pedal and stops when you lift your foot. Made of rugged steel components, the Foot Pedal attaches between the outlet of the pump and the inlet of the hose reel. (Catalog # FM-1)