• I-95 Sectional drain cleaner with 7.5R8 7-1/2-ft x 5/8-in Open-Wound Sections (7x), 15R10 15-ft x 7/8-in Open-Wound Sections (6x), 95-RGH Rear Guide Hose, TB-95 Tool box, R-8CS Cutter Set, R-10CS Cutter Set, R-2CG-10 (2-in) ClogChopper
• Clears 1-1/4" through 4" drain lines
• Drives both 5/8" and 7/8" sectional cables up to 150 ft. down the line
• Change cables in seconds - no tools or adapters required
• Small drum holds 25 ft. of 5/16" Flexicore cable to clear 1-1/4" to 2" lines

Here’s a sectional cable machine that drives 7/8" and 5/8" sections - or even 5/16" cables for small drain work. You can switch from 7/8" to 5/8" and back by repositioning the chuck cone. No adapter is required. Attach a small drum to the back of the machine to drive smaller cables. The I-95 gives you more than versatility. It gives you power and convenience. The motor is a 1/3 hp capacitor type, so it delivers plenty of torque to the cables. Yet, as soon as you lift the drive handle, the cable stops rotating, so there’s no additional torque build-up. You also use the drive handle to carry the machine. And when the I-95 is in position on the job, its four-point base gives it rock-solid stability. A cutter holder is attached to the back so your cutting heads are always with the machine. A ground fault circuit interrupter is standard equipment.

The I-95 has a wide four-point base for greater stability. Its interlocking tubular construction also gives it excellent durability. A ground fault circuit interrupter is standard equipment.

Jaws handle both 7/8" cables or 5/8" cables. No adaptor is required.

The drive handle doubles as a carrying handle and the machine is compact and light enough to carry up to the roof.

Standard cable sections for the I-95 and Root 66 are open-wound hollow cables with R-Connectors (Compatible with Ridgid).

The 5/8" cables are used to clear 2" and 3" lines up to 125 ft. long. They are available in 7-1/2 ft. sections (Cat # 7.5R8). They snap together in a second and are taken apart quickly with a coupling key.

The 7/8" cables are used to clear 3" and 4" lines up to 150 ft. long. Standard sections are available in 15 ft. hollow sections (Cat # 15R10). The 7/8" cables are also available as optional Proflex sectional cables (Cat # 15R10-P shown) that sport an innerspring. It gives the cable greater strength to resist kinking and to transfer extra torque down the cable for additional cutting power.

Smaller 5/16" Flexicore cables (Cat # 25HE1-A) can be used with an optional drum to clear clogged sink lines and other small 1-1/4" to 2" drain lines.

New 5-foot sectional cables make sectional drain cleaning cleaner and easier in confined and hard-to-access areas like bathrooms, kitchens, basements, and even roofs.

The shorter 5 ft. cable length helps keep the machine under better control, reducing the risk of spraying walls, floors, carpets, and cabinets from exposed wet, spinning 15 ft. cables. The short design fits perfectly on 6 ft. drop cloths without hanging over.

Force Multiplier Cables are available in 7/8" diameter (Cat # 5R-10) for use in General’s Root 66 and I-95 sectional drain cleaners, or in 1-1/4" diameter (Cat # 5R-14) for the Rodrunner.

Force Multiplier’s R-connectors also fit other brands of machines, cables, and attachments. The open-wound hollow cables snap together in a second and can be disconnected quickly and easily with a coupling key, further facilitating use in cramped quarters and on roofs.

Includes:

• R-AH - Arrow head starting drill (gets water flowing)
• R-BG Boring gimlet for removing loose objects
• R-1-1/2 UC - 1/1/2" U-Cutter for cutting and scraping
• R-RTR-1 - Retrieving tool for removing loose objects and broken cables
• RCK-8 - Coupling to disconnect cables and cutters

(*included in packages I-95-A, I-95-D, I95DP)

Includes:

• R-SHD-10 - Spear Head starting drill (gets the water flowing)
• R-HA-10 - Hook Auger for removing loose objects
• R-2UC-10 - 2" U-Cutter for cutting and scraping
• R-3UC-10 - 3" U-Cutter for cutting and scraping
• R-RTR-10 - Retrieving tool for removing loose objects and broken cables
• R-CK-10 - Coupling Key to disconnect cables and cutter

(*included in packages I-95-C, I95CP, I-95-D, I95DP)

A great way to extend the life of drain cleaning tools & equipment. Snake-Oil Classic preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings, and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give the equipment a fresh, clean smell. Available in quarts or gallons.

Rip through tough stoppages with the unique ClogChopper multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, and mains, as well as for drain lining jobs.

General offers a variety of sizes, and connector options, including sectional G connectors, as well as other brands of machines, cables, and attachments.

5/8” Sectional Cable with “R” Connectors

7/8” Sectional Cable with “R” Connectors