• Model 88 Package with (10x) 10-ft x 1-1/4-in Flexichain Sections with "G" Connectors (10GF), Cable Feeding Tool, RDCS-G Cutter Set

• As easy to use as a lawn mower
• Self-feeds 8 and 10 ft. cable sections as far as 200 ft. into the line
• Cables snap together in seconds
• Lighter weight and more compact than cage type machines

The Model 88 is almost as easy to run as a lawnmower. You push eight- or ten-foot cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line.

The Model 88 sectional drain cleaning machine handles jobs up to 200 ft. long in lines from 3″ to 10″ diameter. A standard 3/4 hp capacitor motor supplies plenty of power, and an adjustable safety clutch protects cables and operator.

Sections come in two styles: all-purpose Flexichain, which has a chain center, and the stiffer Proflex, which has a spring center. A chain assures easier cable retrieving if the Flexichain spring should break. The inner spring in the Proflex gives it greater stiffness, which is desirable for long or tough jobs. The outer spring is right-hand wound for faster self-feeding.

Couplings are shown below. Both types snap together in a second and are taken apart quickly with a spanner wrench or screwdriver. With the newer “G” connector, no tension is on the locking pin when running in reverse, making it a more durable coupling.

Snap on the optional 78L-CDC adapter and you can use 6 ft. x 7/8″ cables (6L78) to clear smaller lines.

Protects cable and operator in case the cable should get caught in the line. Factory set at 100 inch pounds but can be adjusted easily for very heavy jobs or longer runs.

Gives Model 88 a low profile for more convenient storage and transport. Lift handle and locking collars slide into place for secure operation. Handle on front frame and rear cross bar make lifting and loading into car trunk easier.

Air-actuated for safety. There is not electrical connection between switch and motor. Switch can be removed from handle and used as a foot pedal when working with the cable feeding tube.

It enables cable to get around tight bends and traps by taking advantage of open-wound design of cables. Note that operator controls machine by using power switch in foot pedal mode.

Includes:

• G-SHD - Spear head is a starting drill to get water flowing
• G-HA - Hook auger removes loose objects and broken cables
• G-2UC - 2” U-cutter is for cutting and scraping
• G-3HDSC - 3 inch Heavy Duty Side Cutter
• G-3HDB - 3” heavy duty saw blade for roots and stoppages
• G-4RSB - 4” rotary saw blades for roots and stoppages
• G-RTR-2 - Retrieving tool is for removing loose objects and broken cables
• G-CW - Coupling wrench is to disconnect cables and cutters

RDCS-L Cutter Set features “L” connectors and includes L-SHD, LHA, L-2UC, L-3HDSC, L-3HDB, L-4RSB, L-RTR-2, L-CW

(*G-connector version (RDCS-G) included with packages 88-GP, 88-GF. L-Connector version (RDSC-L) included with packages 88-LP, 88-LF, 88-8LP) 

Sectional cables for the Model 88 snap together in a second and are taken apart quickly with a coupling wrench. The open coils screw into the line making it easier to clear long lines with less effort. They are available in a variety of lengths and connectors for General and competitive brands. With the more recently developed “G” connector, no torque is put on the locking pin when running the machine in reverse, making it a more durable coupling.

Please see Cable Application Chart for cable compatibility HERE

Please See Cable and Cutter Guide HERE

Quick-coupling 1-1/4” Flexichain sectional cables can be used with General’s Model 88™ or Rodrunner. The heavy-gauge open wound outer coil is right-hand wound for faster self-feeding into the line. A chain center gives maximum protection against losing broken cables in a line, while allowing maximum flexibility. They are available in 10 ft. lengths. (Shown with “G” Connector)

Proflex cables have the same 1-1/4” outer cable as the Flexichain cables, for use with the same machines. An inner spring enables the cable to better handle motor torque and has better “push” when working though tough stoppages. They are available in 8 or 10 ft. lengths. (Shown with “L” Connector)

To clear smaller lines, a 6 ft. by 7/8” Proflex cable with “L” connectors (Cat # 6L78) is also available. The 7/8” L-Cable Drive Couple (Cat # 78L-CDC) is required to use it.

Rip through tough stoppages with the unique ClogChopper multi-function cutting tools. Six self-sharpening blades dig into encrusted debris and root masses, easily grinding up stoppages, scale, and crystallized urine, without risking pipe damage.

The spherical design maneuvers around tight bends and traps, thoroughly and safely cleaning metal, plastic, and clay pipes. As it spins it also self-sharpens as it scrapes along the pipe walls. It’s excellent for clearing stacks, downspouts, mains, as well as for drain lining jobs.

General offers a variety of sizes, and connector options, including sectional G connectors, as well as other brands of machines, cables, and attachments.

A great way to extend the life of drain cleaning tools & equipment. Snake-Oil Classic preserves and protects sewer cables against rust and corrosion. It’s better than common lubricants because its special rust inhibitor cuts through moisture and replaces it with a rust-resistant coating. You’ll significantly extend the life of your cables and sewer machine, including the drum, bearings and power cable feed rollers. Snake Oil Classic also includes a deodorizer to give equipment a fresh, clean smell. Available in quarts or gallons.

Sectional Cable with “G” Connectors

Sectional Cable with “L” Connectors