Lightweight Lock Nut Hydraulic Cylinder, 54.9 Tons Capacity, 9.84" Stroke
Enerpac RACL5010 is a lock nut hydraulic cylinder that features 54.9 tons of max advance capacity and a stroke of 9.84". A hardened steel stop ring increases cylinder life and resistance to side-loads by up to 5% and a hard coat finish on all surfaces resists damage and extends cylinder life. It has composite bearings that increase cylinder life and side load resistance. It has a steel base plate and saddle for protection against load-induced damage
The Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity. High-strength return spring for rapid cylinder retraction. The RACL5010 includes a CR-400 coupler and dust cap. All cylinders meet ASME B-30.1 standards.
RACL Series Comparison Table
Model | Maximum Operating Pressure (psi) | Capacity Class (tonnage) | Maximum Cylinder Capacity Advance (tons) | Stroke (in) | Collapsed Height A (in) | Extended Height B (in) | Return Type | Plunger Type | Material |
RACL502 | 10,000 | 50 | 54.9 | 1.97 | 9.29 | 11.27 | Single-Acting, Spring Return | Solid | Aluminum |
RACL504 | 10,000 | 50 | 54.9 | 3.94 | 11.26 | 15.21 | Single-Acting, Spring Return | Solid | Aluminum |
RACL506 | 10,000 | 50 | 54.9 | 5.91 | 13.23 | 19.14 | Single-Acting, Spring Return | Solid | Aluminum |
RACL508 | 10,000 | 50 | 54.9 | 7.87 | 15.2 | 23.08 | Single-Acting, Spring Return | Solid | Aluminum |
RACL5010 | 10,000 | 50 | 54.9 | 9.84 | 17.17 | 27.02 | Single-Acting, Spring Return | Solid | Aluminum |
RACL1002 | 10,000 | 100 | 110.9 | 1.97 | 11.65 | 13.63 | Single-Acting, Spring Return | Solid | Aluminum |
RACL1004 | 10,000 | 100 | 110.9 | 3.94 | 13.62 | 17.57 | Single-Acting, Spring Return | Solid | Aluminum |
RACL1006 | 10,000 | 100 | 110.9 | 5.91 | 15.59 | 21.5 | Single-Acting, Spring Return | Solid | Aluminum |
RACL1008 | 10,000 | 100 | 110.9 | 7.87 | 17.57 | 25.44 | Single-Acting, Spring Return | Solid | Aluminum |