• Statfree HJ dissipative dual layer rubber tray liner, 16in x 24in, Green
• Provides a worksurface that does not generate static charge when properly grounded
• Dissipative top layer - Rtt: 1 x 10E6 to < 1 x 10E9 ohms
• Conductive bottom layer - Rtt: < 1 x 10E6 ohms
• New abrasion resistant rubber compound increases overall surface hardness

The Desco 66491 Statfree HJ Dissipative Dual Layer Rubber Tray Liner is made from a new abrasion resistant rubber compound for greater resistance to cuts, stretching, and tearing. It provides a worksurface that will not generate a static charge when properly grounded.

Product Features

• Dissipative Dual Layer ESD Worksurface
• Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface when properly grounded
• NEW Abrasion Resistance Rubber Compound
• Increased hardness (80 to 90 Type A) for greater resistance to abrasion, cuts, stretching and tearing; may be used in soldering applications with flux and other chemical
• Dissipative (1 x 10E6 to < 1 x 10E9 ohms Rtt) Top Layer
• Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items
• Conductive (< 1 x 10E6 ohms Rtt) Bottom Layer
• Reduces the resistance to ground (Rtg) from the top of the surface to the ground-able point ground and allows the mats to be used with ESD continuous monitors
• Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer Information
• Identifies ESD protective product for control & auditing purposes
• Lead-free RoHS 2 compliant
• Made in the United States of America