• Full-Time continuous monitor for AC outlet wiring, (1) operator, and (1) ESD worksurface
• Monitored ground terminal to verify ground points for mats, carts, tools, and other items
• Wave distortion technology for stable continuous monitoring of single-wire wrist straps
• AC outlet monitor circuit to verify the wiring of an AC outlet
• Embedded relay terminal; Mat monitor switch; Audible alarm adjustment; Park delay timer and snap

The Desco Full-Time Continuous Monitor is a single workstation continuous monitor. It continuously monitors the wiring of an AC outlet, the path-to-ground integrity of one operator, and the ground plane of one ESD worksurface. Mounting tabs make it suitable to install in workbench or equipment settings. The embedded relay terminal activates when a pass condition is displayed on the monitor and can be connected to machines for access control or other devices. Connect the 19332 Light Tower accessory for increased alarm visibility. Connect the 19333 Power Relay accessory to control power to workbenches, hand tools, and other electronic devices dependent on the Full-Time Continuous Monitor's status.

The Full-Time Continuous Monitor is designed with Wave Distortion Technology to provide stable continuous monitoring of the path-to-ground and the presence of 1 megohm resistance of an operator’s wrist strap. Audio and visual alarms activate (in less than 500 milliseconds) when the operator unintentionally disconnects from the monitor or the wrist strap connection points are intermittent. The Full-Time Continuous Monitor also monitors for a worksurface path-to-ground of fewer than 10 megohms and the integrity of the electrical ground used to by the monitor. All Full-Time Continuous Monitors are calibrated to NIST standards and include a certificate. 

• Single workstation continuous monitor - Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
• Wave distortion technology - Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
• Monitored ground terminal - Provides a verified ground point for mats, carts, tools, and other items. Connect with the 09842 Multi-Ground Hub (sold separately)
• Light tower jack - Connects with 19332 Light Tower Accessory (sold separately)
• Auxiliary jack – Connects with 19333 power relay accessory (sold separately)
• AC outlet monitor - Verifies the wiring of an AC outlet and continuously monitors its path-to-ground integrity; fulfills the ANSI/ESD S6.1 section 6.3.1 requirement
• Park delay timer and park snap - Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
• Embedded relay terminal - Activates when a failure is reported by the monitor. Integrates with electronic locks, lights, and buzzers
• Mat monitor switch - Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
• Audible alarm adjustment - Sets the audible alarm volume from loud to louder
• Enclosure with mounting tabs - Installs in workbench and equipment environments
• Single-wire impedance design - Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
• 1.2V operator test voltage - Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
• Continuous visual and audible alarms - Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
• Less than 50 millisecond alarm response time - Identifies failures and intermittencies
• 100-240V AC Input with North American power cord
• NIST calibrated with certificate
• Made in the USA