DeFelsko PosiTector DPMS1-E - Dew Point Meter S1 Standard

We do not recommend our PosiTector DPM for operation in an oven. Delicate internal components and assembly materials are prone to premature damage when subjected to prolonged use in a closed environment with temperatures greater than approximately 50° C.

Answered by Anonymous

Is the PosiTector DPM suitable for high pressure environments?

Answers (1) - Asked by Anonymous

Yes. The PosiTector DPMD is specifically designed for use in pressurized environments (max 200 psi / 1.3 MPa) and has 1/2" NPT threads for secure installation on pipes and tanks.

Answered by Anonymous

Is the PosiTector DPM suitable for applications with low or negative dew point temperatures?

Answers (1) - Asked by Anonymous

The PosiTector DPM provides accurate dew point readings (±3° C) down to -40° C. Dew point is a calculated value, based on temperature and humidity. At low negative dew point temperatures, the calculation is highly dependent on relative humidity and changes of ±3% RH (the tolerance of the PosiTector DPM"s humidity sensor) can have a significant impact on the dew point temperature. The Dew Point (Td) Accuracy page details the accuracy of the calculated dew point temperature based on the measured temperature and humidity.

Answered by Anonymous

Is the PosiTector DPM calibrated at the factory?

Answers (1) - Asked by Anonymous

The PosiTector DPM arrives fully calibrated and ready to measure. A Long-Form Certificate of Calibration traceable to NIST or PTB is included, which documents actual readings taken by your instrument at our calibration laboratory on standards traceable to a national metrology institute. Beware of "Certificates" or "Certificates of Conformance" offered by competitors. These typically do not include actual instrument readings, and are often insufficient to meet common quality requirements.

Answered by Anonymous

Is the PosiTector DPM accurate in freezing temperatures?

Answers (1) - Asked by Anonymous

The PosiTector DPM can accurately measure air temperature (Ta) as low as -40° C.

Answered by Anonymous

How often should the PosiTector probe be recalibrated?

Answers (1) - Asked by Anonymous

PosiTector probes include a Certificate of Calibration with no expiry or end date. They have no shelf life, therefore the length of time in the field is not a good indicator for recalibration intervals. Many organizations with quality programs and recertification programs require annual recalibrations, and this is a good starting point for most users. DeFelsko recommends that customers establish calibration intervals based upon their own experience and work environment. Based on our product knowledge, data and customer feedback, a one year calibration interval from the date the instrument was placed in service is a good starting point.

Answered by Anonymous

How long does it take the probe to acclimate, and provide accurate measurements in a new environment?

Answers (1) - Asked by Anonymous

The PosiTector DPM, like other electronic dew point meters, requires adequate time to acclimate to its operating environment. When moving between similar environments, the instrument will stabilize in a matter of seconds. However, when moving between environmental extremes (like between a dry, air conditioned vehicle and the warm, humid outdoors) it can take up to 30 minutes for readings to stabilize. If left in a dry environment for an extended period of time, this stabilization process may take longer. To restore the original response time, wrap the sensor in a damp cloth overnight.

Answered by Anonymous

Does the PosiTector DPM provide a wet-bulb temperature measurement?

Answers (1) - Asked by Anonymous

Yes. When combined with either a PosiTector Advanced gage body or PosiTector SmartLink wireless probe adapter, the DPM will indicate a wet-bulb temperature measurement.

Answered by Anonymous

Do your instruments require any formal training for use? Do you offer "demo" models?

Answers (1) - Asked by Anonymous

No. Our instruments are designed for simple operation, feature easy-to-use menus, both full and quick instruction manuals, and helpful videos. In lieu of demonstration models, we provide unlimited technical support via telephone and/or email, and a limited 30-day money back guarantee.