Com-Power CDN-S25 - Shielded/Screened cable with 25 conductors,150 kHz to 80 MHz.

Coupling Decoupling Network

• Meets EN 61000-4-6 Requirements
• Individual Calibration
• Frequency Range: 150 kHz - 80 MHz
• Two Year Warranty

The Com-Power The S-series of CDNs are for shielded cables with single or multiple conductors. These CDNs are available for testing 1, 2, 4, 9, 15, 25, 36, and 50 conductor cables. These CDNs have D-type or BNC connectors for EUT and AE connections.

Application

During the test the CDN is connected to the signal cables between the equipment under test (EUT) and auxiliary equipment (AE). The type of cables will determine which CDN to use for the test. The C series CDNs are for injecting disturbing signals onto 50 Ohm (CDN-C50) and 75 Ohm (CDN-C75) coax cables. These CDNs have BNC EUT and AE connections. The S series CDNs are for shielded cables with single or multiple conductors. These CDNs are available for testing 1, 2, 4, 9, 15, 25, 36 and 50 conductor cables. These CDNs have D type or BNC connectors for EUT and AE connections. The AF series CDNs are for unshielded cables with single or multiple conductors carrying low current. Available in 2 conductor (AF2), 4 conductor (AF4) and 8 conductor (AF8). AF series CDNs are supplied with RCA connectors. The T series CDNs are for cables with unshielded balanced conductor pairs typically found in ISDN, DSL and 10/100 baset T data transfer applications. These CDNs can be used at voltages up to 100 VAC and currents up to 2 Amps.