• Version with USB, and Ethernet connections
• Voltage: 0 ~ 60 V
• Current: 0 ~ 6A
• Power range: 0 ~ 150W
• Wide range of voltage & current combinations in constant power

Weighing less than 5.5 lbs., and with a case measuring 3.49″ x 8.45″ x 11.05″, the Chroma 62000L series provides high-quality yet cost-effective programmable benchtop DC power, designed to meet the stringent requirements of the next generation of power electronics. This portable, lightweight benchtop DC power supply with many unique functions is perfect for overall automated test system integration, automotive power electronics MCU/ECU, power semiconductors, wireless communications, etc.

The 62000L Series Programmable DC power supplies have wide operating ranges. Chroma’s model 62015L-60-6 for example, the output specification 150W/60V/6A can operate under different combinations while other common DC power supplies can only achieve the maximum output power of a single point. For wide-range voltage and current applications, one DC power supply can be used to test the input of both low voltage/high current and high voltage/low current UUTs. When integrated into a standard ATE, one 62000L series DC power supply can replace multiple DC power supplies to significantly reduce cost and save space.

The 62000L Series master-slave control has 4 modes listed as follows:

• Parallel Mode: The master-slave parallel control connects multiple power supplies to extend the current output. Max 7 units, output current 0-49A.
• Series Mode: The master-slave parallel control connects multiple power supplies to extend the voltage output. Max 7 units, output voltage 0-252V.
• Normal mode: The master-slave normal control follows the delay time set by each power supply to output from the master.
• Track Mode: The master-slave track mode tracks each power supply to synchronize with the output voltage and status of the master.

1. Display Display setting, readings, and operating status

2. Voltage/Current Key Set the output voltage/output current limit

3. Rotary Key Adjust the V&I and set the parameter

4. Function Key Operation function selection

5. Output Key Enable or disable the output

6. Power Switch AC power on/off

7. Master-Slave Mode and Remote Sense Terminal Set the Master-Slave series/parallel & remote sense

8. Cover Dust cover 

9. Output Terminal Connect the output cable to a UUT

10. USB Interface

11. GPIB or Ethernet Interface

12. Power-Line Voltage Setting

110V/220V AC setting

13. Power Line Inlet

14. Fuse Holder