• Version with GPIB, USB, and Ethernet connections
• Voltage: 0 ~ 36 V
• Current: 0 ~ 7A
• Power range: 0 ~ 108W
• Wide range of voltage & current combinations in constant power

Weighing less than 5.5 lbs., and with a case measuring 3.49″ x 8.45″ x 11.05″, the Chroma 62000L series provides high-quality yet cost-effective programmable benchtop DC power, designed to meet the stringent requirements of the next-generation of power electronics. This portable, lightweight benchtop DC power supply with many unique functions is perfect for overall automated test system integration, automotive power electronics MCU/ECU, power semiconductors, wireless communications, etc.

The 62000L Series Programmable DC power supplies have wide operating ranges. Chroma’s model 62015L-60-6 for example, the output specification 150W/60V/6A can operate under different combinations while other common DC power supplies can only achieve the maximum output power of a single point. For wide-range voltage and current applications, one DC power supply can be used to test the input of both low voltage/high current and high voltage/low current UUTs. When integrated into a standard ATE, one 62000L series DC power supply can replace multiple DC power supplies to significantly reduce cost and save space.

The 62000L Series master-slave control has 4 modes listed as follows:

• Parallel Mode: The master-slave parallel control connects multiple power supplies to extend the current output. Max 7 units, output current 0-49A.
• Series Mode: The master-slave parallel control connects multiple power supplies to extend the voltage output. Max 7 units, output voltage 0-252V.
• Normal mode: The master-slave normal control follows the delay time set by each power supply to output from the master.
• Track Mode: The master-slave track mode tracks each power supply to synchronize with the output voltage and status of the master.

1. Display Display setting, readings, and operating status

2. Voltage/Current Key Set the output voltage/output current limit

3. Rotary Key Adjust the V&I and set the parameter

4. Function Key Operation function selection

5. Output Key Enable or disable the output

6. Power Switch AC power on/off

7. Master-Slave Mode and Remote Sense Terminal Set the Master-Slave series/parallel & remote sense

8. Cover Dust cover

9. Output Terminal Connect the output cable to a UUT

10. USB Interface

11. GPIB or Ethernet Interface

12. Power-Line Voltage Setting

110V/220V AC setting

13. Power Line Inlet

14. Fuse Holder