• Halogen-Free
• Ideal for all rework, solder, de-solder and reflow applications
• Non-corrosive, non-conductive, no-clean
• Tack flux will not run all over PCB when applied
• Has a pleasant odor

Tack Flux No-Clean Halogen-Free in a 10cc syringe w/plunger & tip. Used for touch up and rework, attachment of BGA spheres, soldering flip chip components. Low viscosity No-Clean synthetic paste flux.

Stencil Life

• >8 hours @ 20-50% RH 22-28C (72-82F)
• >4 hours @ 50-70% RH 22-28C (72-82F)

Stencil Cleaning

• Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).

Storage and Handling

• Store refrigerated or at room temperature 3-25C (37-77F). Do not freeze. Allow 4 hours for flux to reach an operating temperature of 20-25C (68-77F) before use.

Transportation

• This product has no shipping restrictions. Shipping below 0C (32F) or above 25C (77F) for normal transit times by ground or air will not impact this product's stated shelf life.