• Simple, one-person remote control operation
• Non-toxic pleasant citrus scented smoke
• UltraTraceUV dye pin-points leak locations
• Can be used during business hours or when customers are home

EZSMOKE ® allows a technician to use low pressure, non-toxic smoke with a pleasant lemon scent and UV dye, to quickly locate annoying sewer gas leaks that are often difficult and time-consuming to find in cuts, cracks, fractures, punctures, porosity, or unsealed fittings inside or outside residential or commercial buildings.

The core of EZSmoke ®’s convenience is that it uses patented technology to send non-toxic smoke containing a trace dye (UltraTrace UV) through the air (not a liquid) that is contained within pipes, wall cavities, or other forms of enclosed spaces. Any visible smoke immediately provides an indication of a large leak.

However, if smoke alone cannot provide the source of sewer gas odor, technicians can rely on UltraTrace UV, which is carried within the smoke vapor, to pinpoint very small leaks of annoying sewer gas.

• EZsmoke creates a dense pleasant smelling, non-toxic visible vapor, or smoke – thick white in color. This smoke allows the quick visual location of leaks, even in the hardest-to-reach places.
• UltraTraceUV® technology, a specially designed UV dye carried with the vapor, collets around the exit of most leaks – marking very small leaks that smoke alone can’t find.
• EZsmoke’s pleasant citrus-scented smoke allows it to be used during regular business with people around and provides proof of leaks when smoke can’t be seen, but can be found with UltraTraceUV®.

With just five pounds of pressure in the system being tested, EZsmoke allows one technician to locate all cuts, cracks, fractures, punctures, porosity, or unsealed fitting leaks in the system. Simply hook the EZsmoke unit to the system being tested and a source of compressed air or inert gas (i.e., nitrogen, CO2) and run the automated pressure leak-down test. If the test indicates leakage in the system, fill the system with vapor, plug all outflow exits in the system, set the unit to low-pressure leak testing, and look for smoke or check for the smoke’s citrus scent.

Once the system being tested is charged with smoke, simply inspect all areas of the system and look for smoke collecting near existing leaks. Or smell for the citrus scent you should detect if leaks are too small to see. With the special UV light included with every unit finding most leaks is simple as going back to areas smoke was seen or where the citrus scent was present and looking for the glowing dye surrounding the actual leak.

Get EZsmoke and Get Finding Leaks Faster.

EZsmoke’s wireless remote control lets one technician operate the unit from the next room or on the roof, letting you find leaks far faster and with a lot less hassle. Letting you get to the really important part of the job faster. Fix the leaks you found. Getting the job done faster and making customers happier.

• Find large leaks by using white light to see smoke
• Pinpoint the exact location of small leaks by using UV light and UltraTrace UV dye.
• Convenient remote control quickly shuts EZSmoke off from greater distances, next room, rooftops, etc.
• Use during normal business hours when occupants are present or away.
• Non-toxic pleasant lemon-scented smoke.
• Often eliminates the need to tear out floors or walls to locate leaks.
• Low pressure (5 lbs) within the system)
• Includes 8 accessories. Simple instructions are located on inside case labels.