LVPRO Applications |
LVPRO Model 20 |
LVPRO Model 30 |
LVPRO Model 30SR |
CABLE TEST PACK (ALL TYPES)
Cable diagram, Pass/Fail, Delay, Skew, Ohms |
✔️ |
✔️ |
✔️ |
WALL JACK ID* (Smart Remotes - included with LVPRO 3SR)
ID or test/ID in one pass (Smart Remotes). RJ45 and coax. *Requires remote kit(s) sold separately. |
✔️ |
✔️ |
✔️ |
SPEAKER POPPER
Locate speakers by audibly “popping” them. |
✔️ |
✔️ |
✔️ |
SPKR 7.1 ID# MAPPER*
Map and label A/V speaker wires. *Requires remote kit(s) sold separately. |
✔️ |
✔️ |
✔️ |
PORT BLINK CABLE DETECTION
Locate a cable connection to a switch port by blinking the switch’s Link LED. |
✔️ |
✔️ |
✔️ |
TONE CABLE DETECTION*
Place a tone on one end and detect it on the far end. *Requires remote kit(s) sold separately. |
✔️ |
✔️ |
✔️ |
ALERT LEDS (LINKS, VOLTS)
Two LEDs quickly alert you to an active switch connection or voltage on the line. |
✔️ |
✔️ |
✔️ |
LENGTH PACK - Adds length to Cable Test App (cable length, distance to open or short) All wire types. Use built-in VOP values or calibrate with your cable. |
✔️ |
✔️ |
✔️ |
Return Loss Quality - RLQ (Included with the Length-RLQ APP)
Return Loss Quality tests for load mismatches that affect the wire’s power and data transfer capability. |
✔️ |
✔️ |
✔️ |
10/100/1000 DETECTION/DISPLAY
Plug into any active port (computer, switch, VoIP, access point) and display its capabilities. |
|
✔️ |
✔️ |
PoE / PAIRS
Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both). |
|
✔️ |
✔️ |
CCTV / Vpp (peak to peak voltage)
CCTV systems require a minimum of 1Vpp to DVR. Measure and display Vpp of video signal. |
|
✔️ |
✔️ |
PHONE
Detect central office telephone connections. Display voltage and cable location (up to 4 phones). |
|
✔️ |
✔️ |
LOADED BATTERY TEST
Test alarm system and other backup batteries by doing a loaded battery test. |
|
✔️ |
✔️ |
PRINT UP TO 250 REPORTS
Store for later printing up to 250 tests (all cable types). USB and software included. |
|
✔️ |
✔️ |