| General Specifications |
| Transmitter |
KSG 200 |
KSG 200 A |
KSG 200 T |
KSG 200 TA |
| -- |
For cable identification on disconnected cables |
For cable identification on live cables |
| Pulse voltage |
300 V |
300 V |
300 V |
300 V |
| Pulse current Max. |
180A Max. 180 |
180A Max. 180 |
180A Max. 180 |
180A Max. 180 |
| Pulse sequence |
15 pulses/min 1 |
15 pulses/min 1 |
15 pulses/min 1 |
15 pulses/min 1 |
| Power supply |
|
|
|
|
| Mains voltage |
115/230/240 V, 50/60 Hz |
-- |
115/230/240 V, 50/60 Hz |
-- |
| External supply |
-- |
DC 12V |
-- |
DC 12V |
| Rechargeable battery |
-- |
NiMH rechargeable battery
12 V |
-- |
NiMH rechargeable battery
12 V |
| Electric strength of output |
-- |
-- |
Max. 400 V, 50/60 Hz |
Max. 400 V, 50/60 Hz |
| Measurement Category |
-- |
-- |
CAT IV/600 V |
CAT IV/600 V |
| Nominal DC or AC (line-to-neutral):600 V |
| Protection class |
II |
Not applicable in battery
operation |
II |
Not applicable in battery
operation |
| Degree of protection |
IP40 |
IP40 |
IP40 |
IP40 |
| NiMH rechargeable battery (KSG 200 A / KSG 200 TA) |
| Battery type |
NiMH rechargeable battery 12 V (10 cells);
4.2 – 5 Ah |
| Battery life |
Approx. 2.5 – 3.5 h |
| Charging time |
Approx. 4.5 – 5 h |
| Charger |
Power supply
100 – 240 V, 50/60 Hz |
| Output voltage |
DC 10.5 – 20 V, 1 A |
General information on the cable identification systems in the
KSG 200 series |
Ambient temperature
(operation) |
-10°C to +55°C |
| Storage temperature |
-20°C to +50°C |
| Case dimensions (W x H x D) |
Approx. 594 x 174 x 435 mm |
Weight of case with
transmitter and receiver |
Approx. 6.2 kg (without battery)
Approx. 7.7 kg (with battery) |
| Safety and EMC |
CE compliant in accordance with
Low Voltage Directive (2014/35/EU), EMC
Directive (2014/30/EU), Environmental
testing EN 60068-2-ff |
| Clip-on cureent transformer (optional) |
| |
|
AZ 10/D 70 |
AZ 10/D 80 |
AZ 10/D 125 |
| Inner diameter |
D |
70 mm |
80 mm |
125mm |
| Dimensions |
A |
133 mm |
146 mm |
182 mm |
| B |
336 mm |
336 mm |
317 mm |
| C |
126 mm |
128 mm |
125 mm |
| KSG 200 / KSG 200 T receiver |
| Sensor |
Flexcoupler Ø 150 mm or
Flexcoupler Ø 250 mm |
Sensitivity with
galvanic impulse coupling with inductive impulse coupling |
100% at a loop resistance of 400 Ohm (I = 0.75 A)
100% at loop resistance < 6 Ohm |
| Load current range |
0 – 199 A ± 2%, 50/60 Hz |
| Display |
LCD display |
| Power supply |
Automatic recharging in the holder of the transmitter |
| Degree of protection |
IP52 |
| Dimensions (W x H x D) |
Approx. 100 x 25 x 211 mm |
| Weight |
| with flexcoupler Ø 150 mm |
Approx. 360 g |
| with flexcoupler Ø 250 mm |
Approx. 470 g |