Ranges: 200 mV, 2 V, 20 V, 200 V, 1000V Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V Accuracy: ?(0.8 % rdg + 1 dgts) Input Impedance: 10 MO Overload Protection: 1000 VDC or 750 VACrms* Ranges: 200 mV, 2 V, 20 V, 200 V, 750V Resolution: 0.1 mV, 1 mV, 10 mV, 100 mV, 1 V Accuracy: 200 mV & 20 V ranges: ?(1.5 % rdg + 5 dgts)200 V & 750 V ranges: ?(2.0 % rdg + 5 dgts) Input Impedance: 10 MO Overload Protection: 1000 VDC or 750 VACrms* Ranges: 20 mA, 200 mA, 10 A Resolution: 10 uA, 100 uA, 10 mA Accuracy: 20 mA to 200 mA ranges: ?(1.0 % rdg + 1 dgts)10 A range: ?(3.5 % rdg + 3 dgts) Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period Ranges: 20 mA, 200 mA, 10 A Resolution: 10 uA, 100 uA, 10 mA Accuracy: 20 mA to 200 mA ranges: ?(2.0 % rdg + 5 dgts)10 A range: ?(3.5 % rdg + 5 dgts) Input Protection: 0.5 A/500 V & 10 A/600 V fast blow ceramic fuses 10A Input: 10 A for 60 sec max. followed by a 10 minute cooling period Ranges: 200 O, 2 kO, 200 kO, 20 MO, 2000 MO Resolution: 0.1 O, 1.0 O, 100 O, 10 kO, 1 MO Accuracy: 200 O to 200 kO ranges: ?(1.0 % rdg + 4 dgts)20 MO range: ?(2.0 % rdg + 4 dgts)2000 MO range: ?(5.0 % rdg + 10 dgts) Open Circuit Voltage (typical): 0.3 VDC (3.0 VDC on 200 O, 2000 MO range) Overload Protection: 500 VDC/ACrms Ranges: 2 nF , 20 nF, 200 nF, 2.0 uF, 20 uF Resolution: 1 pF, 10 pF, 100 pF, 1 nF, 10 nF Accuracy: ?(4 % rdg + 10 dgts) Overload Protection: Discharge capacitor before connecting Ranges: 2 kHz, 20 kHz, 200 kHz, 2 MHz, 20 MHz Resolution: 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz Accuracy: ?(0.1 % rdg + 3 dgts) Sensitivity: 2.0 Vrms minimum Minimum Pulse Width: 25 ns Duty Cycle Limits: 30 % and 70 % Overload Protection: 500 VDC/AC rms Test Current: 1.0 mA (typical) Resolution: 10 mV Accuracy: ?(1.5 % rdg + 3 dgts) Open Circuit Voltage: 3.0 VDC (typical) Overload Protection: 500 VDC/ACrms Audible Indication: Less than 100 O Response Time: 100 ms Overload Protection: 500 VDC/ACrms Ranges: 0 to 1000 Base Current: Approximately 10 uADC (VCE = 3.0 VDC) Threshold: Logic Hi (2.8 V +0.8 V) / Logic Lo (0.8 V +0.5 V) Indication: 40 msec beep at logic Lo Overload Protection: 500 VDC/AC rms |