Other Information | Bandwidth: 25 MHz Real Time Sampling Rate: Single Channel: 500 MSa/s 2 Channels interleaved: 250 MSa/s (for timebase faster than 250 ns/div) Channels 2 Rise time: 14 ns Record Length: 32,000 points when time base is 50 ns or 25 ns at maximum data depth (16,000 points for 50 s - 100 ns time base), 16,000 points for dual channel operation Vertical Resolution: 8 bit Vertical Sensitivity: 2 mV/div -5 V/div(1-2-5 order) DC Gain Accuracy: 3.0%: 10 mV/div to 10 V/div in Fixed Gain Ranges 4.0%: 2 mV/div ,5 mV/div and Variable Gain Ranges | Maximum input voltage: 400 V (DC+AC pk-pk, 1 MO input impedance, X10), CAT I
Position Range: 2 mV?100 mV: ?2 V
102 mV - 5 V: ?40 V
Horizontal Scan Range: 2.5 ns/DIV - 50 s/DIV
Scan mode: 100 ms/DIV - 50 s/DIV (1 - 2.5 - 5 sequence)
Timebase Accuracy: ?100 ppm measured over 1ms interval
Input Coupling: AC, DC, GND
Input Impedance: 1 MO?2% || 16 pF?3 pF
Vertical and Horizontal Zoom: Vertically or horizontally expand or compress a live or stopped waveform
I/O interface: USB device port on front panel supports USB flash drives. USB host port for connection to PC or Printer. RS-232 port for connection to PC.
Sample: Display sample data only
Peak Detect: Capture the maximum and minimum values of a signal
Average: Waveform averaged, selectable from 4, 16, 32, 64, 128, 256
Scan Mode: For time base settings 0.1 s/div - 50 s/div
Trigger Types: Edge, Pulse Width, Video*, Slope, Alternating
Trigger Modes: Auto, Normal, Single
Trigger Coupling: AC, DC, LF reject, HF reject
Trigger Source: CH1, CH2, EXT, EXT/5, AC Line
Pulse Width Trigger Trigger Modes: (,,=) Positive Pulse Width, (,,=) Negative Pulse Width
Slope Trigger: (,,=) Positive slope, (,,=) Negative slope
Time: 20 ns -10 s
Hardware Frequency: Counter
Reading Resolution: 6 Bytes
Accuracy: ?0.01%
Range: DC Couple, 10 Hz to 25 MHz
Signal Types: All trigger signals (except pulse width trigger and video trigger)
Math operation: Add, Subtract, Multiply, Divide, FFT
FFT: Window mode: Hanning, Hamming, Blackman, Rectangular Sampling points: 1024
Measure: Amplitude, Average, Base, Burst Width, Cyclic RMS, + Duty Cycle, - Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Rise Overshoot, Fall Overshoot, Rise Preshoot, Fall Preshoot, Peak-Peak, Period, Phase, Rise Time, RMS, Top, + Width, - Width, plus 8 advanced parameters for edge to edge timing measurements
Display: 5.7 in. Color TFT, 320 x 240 resolution, 64K color
Display Contrast: (Typical state) 150:1
Backlight Intensity: (Typical state) 300 cd/m2
Display Area: 8 x 12 div
Display Mode: Dots, Vector
Persistence: Off, 1 sec, 2 sec, 5 sec, Infinite
Menu Display Timer: 2 sec, 5 sec, 10 sec, 20 sec, Infinite
Screen-Saver: Off, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, 1 hour, 2 hour, 5 hour
Waveform interpolation: Sin(x)/x, Linear
Display Color: Mode Normal , Invert
Power Requirements: 100-240 VAC, CAT II, 50 VA max, 45 Hz to 440 Hz
Temperature: Operating: 50? F to 104 ?F (10 ?C to 40 ?C)
Not operating: -4 ?F to 140 ?F (-20 ?C to 60 ?C)
Humidity: Operating: 85% RH, 104 ?F (40 ?C)
Not operating: 85% RH, 149 ?F (65 ?C)
Altitude: Operating: 9,842 ft (3,000 m)
Not operating: 50,085 ft (15,266 m)