| Power Supply |
| AC power |
100-240VAC 50/60Hz |
| AC/DC power※1 |
24VAC 50/60Hz, 24-48VDC |
| Allowable voltage range |
90 to 110% of rated power voltage |
| Power consumption |
| AC power |
Max. 5VA (100-240VAC 50/60Hz) |
Max. 6VA (100-240VAC 50/60Hz) |
| AC/DC power※1 |
Max. 7VA (24VAC 50/60Hz),
Max. 6W (24-48VDC) |
Max. 8VA (24VAC 50/60Hz),
Max. 7W (24-48VDC) |
- |
- |
Max. 8VA(24VAC 50/60Hz),
Max. 7W (24-48VDC) |
| Display method |
7-segment LED (PV: red, SV: green) |
| Character size |
| PV (W×H) |
TZ4SP: 4.8×7.8mm
TZN4S: 7.8×11.0mm |
4.8×7.8mm |
TZ4M: 9.8×14.2mm
TZN4M: 8.0×13.0mm |
8.0×10.0mm |
TZ4H: 3.8×7.6mm
TZN4H: 7.8×11.0mm |
9.8×14.2mm |
| SV (W×H) |
TZ4SP: 4.8×7.8mm
TZN4S: 5.8×8.0mm |
4.8×7.8mm |
TZ4M: 8.0×10.0mm
TZN4M: 5.0×9.0mm |
8.0×10.0mm |
TZ4H: 3.8×7.6mm
TZN4H: 5.8×8.0mm |
8.0×10.0mm |
| Input type |
| RTD |
DPt100Ω, JPt100Ω, 3-wire (allowed resistance: max. 5Ω per line) |
| TC |
K(CA), J(IC), R(PR), E(CR), T(CC), S(PR), N(NN), W(TT)(allowed resistance: max. 100Ω per line) |
| Analog |
1-5VDC, 0-10VDC, DC4-20mA |
| Display accuracy |
F.S. ±0.3% or 3℃, greater value |
| Control Output |
| Relay |
250VAC 3A 1c |
| SSR |
Max. 12VDC ±3V 30mA |
| Current |
DC4-20mA(load resistance max. 600Ω) |
| Option output |
| EVENT1 |
250VAC 1A 1a |
| EVENT2 |
- |
250VAC 1A 1a |
| PV transmission |
- |
DC4-20mA(load resistance max. 600Ω) |
| Communication |
- |
- |
RS485 communication |
| Control method |
ON/OFF, P, PI, PD, PIDF, PIDS control |
| Alarm output hysteresis |
1 to 100℃ (0.1 to 100.0℃) variable |
| Proportional band (P) |
0.0 to 100.0% |
| Integral time (I) |
0 to 3,600 seconds |
| Derivative time (D) |
0 to 3,600 seconds |
| Control period (T) |
1 to 120 seconds |
| Sampling period |
0.5 seconds |
| LBA setting |
1 to 999 seconds |
| Ramp setting |
Ramp Up, Ramp Down: 1 to 99 minutes each |
| Dielectric strength |
2,000VAC 50/60Hz for 1 min. (between input and power terminals) |
| Vibration |
| Mechanical |
0.75mm amplitude at frequency 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 2 hours |
| Electrical |
0.5mm amplitude at frequency 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 10 min. |
| Relay life cycle |
| Control output |
Mechanical: Min. 10,000,000 operations,
Electrical: Min. 100,000 operations (250VAC 3A resistance load) |
| Option output |
Mechanical: Min. 20,000,000 operations,
Electrical: Min. 500,000 operations (250VAC 1A resistance load) |
| Insulation resistance |
Over 100MΩ (at 500VDC megger) |
| Noise |
| AC power |
Square shaped noise by noise simulator (pulse width 1㎲) ±2kV R-phase, S-phase |
| AC/DC power※1 |
Square shaped noise by noise simulator (pulse width 1㎲) ±500V R-phase, S-phase |
Square shaped noise by noise simulator (pulse width 1㎲) ±2kV R-phase, S-phase |
| Memory retention |
Approx. 10 years (non-volatile semiconductor memory type) |
| Environment |
| Ambient temp. |
-10 to 50℃, storage: -20 to 60℃ |
| Ambient humi. |
35 to 85%RH, storage: 35 to 85%RH |
| Weight |
TZ4SP: Approx. 205g (Approx. 144g)
TZN4S: Approx. 226g (Approx. 164g) |
Approx. 218g (Approx. 162g) |
TZ4M: Approx. 360g (Approx. 228g)
TZN4M: Approx.355g (Approx. 246g) |
TZ4W: Approx. 365g (Approx. 246g)
TZN4W: Approx. 351g (Approx. 232g) |
TZ4H: Approx. 365g (Approx. 246g)
TZN4H: Approx. 351g (Approx. 232g) |
TZ4L: Approx. 474g (Approx. 304g)
TZN4L: Approx. 474g (Approx. 303g) |