| General Specifications |
| Pressure type |
Gauge pressure |
| Negative pressure |
Standard pressure |
Compound pressure |
| Model |
Voltage output |
PSS-V01V-R1/8 |
PSS-01V-R1/8 |
PSS-1V-R1/8 |
PSS-C01V-R1/8 |
| Current output |
PSS-V01A-R1/8 |
PSS-01A-R1/8 |
PSS-1A-R1/8 |
PSS-C01A-R1/8 |
| Rated pressure range |
0.0 to -101.3kPa |
0.0 to 100.0kPa |
0 to 1,000kPa |
-101.3 to 100.0kPa |
| Analog output range |
5.0 to -101.3kPa |
-5.0 to 110.0kPa |
-50 to 1,100kPa |
-101.3 to 110.0kPa |
| Max. pressure range |
2 times of rated pressure |
2 times of rated pressure |
1.5 times of rated pressure |
2 times of rated pressure |
| Applied fluid |
Air, non-corrosive gas |
| Power supply |
12-24VDC ±10% (ripple P-P: Max. 10%) |
| Current consumption |
Voltage output type: Max. 15mA, Current output type: - |
| Effect by power supply |
Max. ±0.3% F.S. |
| Protection circuit |
Reverse polarity protection circuit |
| Analog output |
Voltage output |
• Output voltage: 1-5VDC ±2% F.S. • Linear: Max. ±1% F.S. • Output impedance: 1kΩ |
| Current output |
• Output current: DC4-20mA ±2% F.S. • Linear: Max. ±1% F.S. |
| Temp. characteristics of analog output |
Max. ±2% F.S. of output voltage/current at 25℃ within temperature range 0 to 50℃ |
| Insulation resistance |
Over 50MΩ (at 500VDC megger) |
| Dielectric strength |
2000VAC 50/60Hz for 1 minute |
| Vibration |
1.5mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours |
| Environment |
Ambient temp. |
0 to 50℃, storage: -10 to 60℃ |
| Ambient humi. |
35 to 85%RH, storage: 35 to 85%RH |
| Protection structure |
IP40 (IEC standard) |
| Material |
Front, Rear case: Polycarbonate, Pressure port: Nickel plated brass |
| Cable |
Ø3, 4-wire, 3m (AWG28, Core diameter: 0.08mm, Number of cores: 19, Insulator out diameter: Ø0.88mm) |
| Sold separately |
Sensor connector wire mount plug (CNE-P04- )※1 |
| Approval |
CE |
| Weight※2 |
Approx. 60g (approx. 26g) |
※1: For more information about sensor connector wire mount plug, refer to '(G) Connector/Socket'.
※2: The weight includes packaging. The weight in parenthesis is for unit only.
※F.S.: Rated pressure.
※Environment resistance is rated at no freezing or condensation. |