| Power supply |
100-240VAC 50/60Hz |
| Allowable operation voltage |
90 to 110% of rated voltage |
| Power consumption |
100VAC 50/60Hz: Max. 9VA (Condotion:12VDC/200mA resistive load), 240VAC 50/60Hz: Max. 10VA |
| Power for external sensor |
12VDC ±10% Approx. 200mA |
| Input (IN1) (IN2) |
Selectable NORM/INV.
Selectable OR/AND operation for IN1, IN2 input.
Selection function for IN2 derivative action. |
Selectable NORM/INV. Operation for IN1, IN2 AND. |
Selectable NORM/INV. Operation for IN1, IN2 AND. |
| NPN input type |
NPN input type |
NPN input type |
NPN input type |
NPN input type |
| Input type |
• PA10-U (No-voltage input) Impedance at short-circuit: Max. 680Ω, Residual voltage at short-circuit: Max. 0.8V, Impedance at open: Min. 100kΩ
• PA10-V/PA10-W (No-voltage input) Impedance at short-circuit: Max. 300Ω, Residual voltage at short-circuit: Max. 2V, Impedance at open: Min. 100kΩ
• PA10-VP/PA10-WP (Voltage input) Input impedance: 5.6kkΩ, "H" level voltage:5-30VDC, "L" level voltage: 0-2VDC |
| Output |
Contact Output |
OUT: 250VAC 3A (resistive load) |
OUT1, OUT2: 250VAC 3A (resistive load) |
| Solid-State Output |
O.C OUT1/O.C OUT2: NPN open collector output Max. 30VDC 100mA |
O.C OUT: NPN open collector output Max. 30VDC 100mA |
----- |
| Response time |
Input: Min. 2µs, Relay contact output: Min. 10ms, Transistor output: Min. 0.5µs (When it is encoder mode) |
Time setting function
by each mode * Only for PA10-U |
Have |
- ON Delay Mode
- One-Shot Delay Mode
- Flicker One-Shot Mode
- High-Speed Detection Mode
- OFF Delay Mode
- Flicker Mode
- Low-Speed Detection Mode
- ON/OFF Delay Mode
|
| None |
- Normal Mode
- Flip-Flop Mode
- Encoder (Mode 9 to 11)
|
| Relay Life Cycle |
Mechanical |
Min. 10,000,000 operations |
| Electrical |
Min. 100,000 operations (250VAC 3A resistive load) |
| Dialectric Strenght |
2000VAC 50/60Hz for 1 minute |
| Insulation Resistance |
Min. 100MΩ (at 500VDC megger) |
| Environment |
Ambient Temp. |
-10 to 55°C, storage: -25 to 60°C |
| Ambient Humi. |
35 to 85%RH, storage: 35 to 85%RH |
| Unit Weight |
Approx. 150g |
Approx. 160g |
If the load is connected over 200mA at the sensor output, it may cause mechanical trouble.
Environment resistance is rated at no freezing or condensation. |