| Autonics BWP Series General Specifications |
| Sensing type |
Through-beam |
| Sensing distance |
0.1 to 5m |
| Sensing target |
Opaque materials of min.Ø30mm |
| Optical axis pitch |
20mm |
| Number of optical axis |
8EA |
12EA |
16EA |
20EA |
| Sensing width |
140mm |
220mm |
300mm |
380mm |
| Power supply |
12-24VDC ±10% (Ripple P-P : Max. 10%) |
| Protection circuit |
Built-in |
| Current consumption |
Emitter : Max. 80mA, Receiver : Max. 80mA |
| Control output |
NPN or PNP open collector output
- Load voltage : Max. 30VDC
- Load current : Max. 150mA
- Residual voltage - NPN : Max. 1V, PNP : Min. 2.5V
|
| Operation mode |
Light ON/Dark ON by switch |
| Short-circuit protection |
Built-in |
| Response time |
Max. 6ms (Frequency B selection is max. 7ms) |
| Light source |
Infrared LED (850nm modulated) |
| Synchronization type |
Synchronized by synchronous line |
| Interference protection |
Interference protection by transmission frequency selection |
| Environment |
Ambient illumination |
Sunlight : Max. 10,000lx (received light side illumination) |
| Ambient temperature |
-10 to 55°C, storage : -20 to 60°C |
| Ambient humidity |
35 to 85%RH, storage : 35 to 85%RH |
| Noise resistance |
±240V the square wave noise (pulse width: 1μs) by the noise simulation |
| Dielectric strength |
1,000VAC 50/60Hz for 1 minute |
| Insulation resistance |
Min. 20MΩ (at 500VDC megger) |
| Vibration |
1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 2 hours |
| Shock |
500m/s2 (approx. 50G) in each X, Y, Z direction for 3 times |
| Protection structure |
IP40 (IEC standard) |
| Material |
Case : PC/ABS, Sensing part : PMMA |
| Cable |
Ø3.5mm, 4-wire, Length : 3m (Emitter: Ø3.5mm, 4-wire, Length : 3m) (AWG 24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : Ø1mm) |
| Approval |
CE |
| Weight*1 |
Approx. 400g
(approx. 280g) |
Approx. 520g
(approx. 320g) |
Approx. 620g
(approx. 360g) |
Approx. 680g
(approx. 430g) |
*1: The weight includes packaging. The weight in parentheses is for unit only.
*The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment. |