| DC Voltage |
200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| AC Voltage |
200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V |
| Current AC/DC |
200.0 µA, 2.000 mA, 20.00 mA, 200.0 mA, 2 A |
| Resistance |
200.0 Ω, 2.000 kΩ, 20.00 kΩ, 200.0 kΩ, 2.000 MΩ, 20.00 MΩ, 2000 MΩ |
| Continuity beeper |
• |
| VolTect™ Non-Contact Voltage Detection |
70 V AC → 600 V AC (50 Hz → 60 Hz) |
| Capacitance |
- |
| Frequency |
- |
| Temperature |
- |
| Logic test |
TTL, 20 MHz |
| Battery test |
- |
| Display |
3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999 |
| Polarity |
Automatic, positive implied, negative polarity indication |
| Over-range |
(OL) or (-OL) is displayed |
| Zero |
Automatic |
| Low battery indication |
The + is displayed when the battery voltage drops below the operating level |
| Auto power off |
Approx. 10 minutes |
| Measurement rate |
2 times per second, nominal |
| Operating environment |
0 °C to 50 °C at <70 % R.H. |
| Accuracy |
Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity |
| Power |
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| DC Volt ranges |
200 mV, 2 V, 20 V, 200 V, 600 V
Accuracy: ± (0.5 % rdg + 1 dgt) |
| AC Volts (45 Hz to 500 Hz) ranges |
200 mV 2 V, 20 V, 200 V, 600 V
Accuracy: ± (1.5 % rdg + 5 dgts) |
| DC Current ranges |
200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.0 % rdg + 2 dgt)
2 A, Accuracy ± (2.0 % rdg + 3 dgts) |
| AC Current (45 Hz to 500 Hz) ranges 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy |
± (1.5 % rdg + 5 dgts)
2 A, Accuracy ± (2.5 % rdg + 5 dgts) |
| Resistance |
200 Ω , 2 kΩ , 20 kΩ , 200 kΩ , 2 MΩ ± (1.0 % rdg + 4 dgts) |
| Resistance |
2000 MO ± {5.0 % (rdg -10 dgts) +20 dgt} |
| Continuity audible indication |
Less than 25 Ω |
| Diode test current |
1.2 mA (approximate) ±(1.5 % rdg + 3 dgts) |
| Logic test |
TTL |
| Non-contact voltage indicator |
Sense voltage 70 V to 600 V AC (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges |