• ECU2 HEPA Air Filtration Unit - for heavy-duty capture of smoke/fumes/odor and VOC removal
• Integrated 750CFM blower (Electronic, 4-step variable speed); 220VAC, 3-phase
• Display with filter monitoring and LED alerts via electronic VOC sensor
• Deep pleat pre-filter, HEPA filter, two 40lb activated carbon modules (gas/odor and VOC control)
• Small footprint - 24in (width) x 35in (depth) x 52in (high); Stainless steel cabinet; 490lbs w/filters

The Accurate Thermal Systems HEPA Air filtration systems are designed to capture and remove smoke, particulates, fumes, and VOCs from extrusion and injection molding thermal tool cleaning operations. These systems can be used for any operation to capture fine dust, welding smoke, paint fumes, and other process by-products. The HEPA filtration system contains a prefilter, a HEPA filter rated at 99.97% efficiency down to 0.3uM, and a sizeable volume of activated carbon for capturing odors and VOCs.

Accurate Thermal Systems Model ECU2 is a mobile HEPA air filtration system. The ECU2 is recommended for moderate to heavy-duty use. The filtration systems include a prefilter that is 90% efficient at 3-10uM, a HEPA filter that is 99.97% efficient at 0.3uM, and up to 80 pounds of activated carbon for capturing odor and VOCs. All filters are easily accessible for inspection and replacement via the main panel door. This system contains an electronic filter monitor with a status indicator to advise when filters require replacement.

The ECU2 is an excellent choice for extrusion and injection molding tool cleaning operations and other industrial environments where smoke and fumes must be captured. In manufacturing environments where an unfiltered exhaust system is already in place to capture emissions from extruders, the tool room, and other operations, the ECU2 can be added to vent filtered air directly outside or into the existing plant exhaust system.

• Small footprint and economical cost
• Integrated 750CFM blower
• Stainless steel cabinet
• Display with filter monitoring via electronic VOC sensor
• Electronic 4-step variable speed blower
• Interface for 24 VDC remote start/stop
• 60 dba sound level

An advanced graphical display monitors the status of each filter and when they need to be replaced an LED lights up. A calibrated VOC/gas sensor is used to monitor filter effectiveness. Electronic four-speed blower control is used to optimize source capture in your operation and with your materials.

Filters are easy to replace via the front access door. A 99% efficient at 1uM pre-filter is on the bottom, followed by the 99.97% efficient at 0.3uM HEPA filter and then two 40lb activated carbon modules for broad spectrum gas/odor and VOC control.