The SpecMat-H homogeneous material is a single-layer, ESD-safe thermoplastic vinyl. Without adding cost, the manufacturing extruding process used to produce this high-performance vinyl utilizes superior plasticizers and lower-outgassing solvents, unlike ESD vinyl made by cast coating.

The proprietary polymers used to manufacture this material are homogeneously dispersed with a migratory anti-static formula that allows for both surface and volume resistance. By design, anti-static properties cannot be worn away through wear or outgassing.

Resistant to solder, heat, and most common solvents, SpecMat-H is an economical choice for static-sensitive production areas in electronics manufacturing and laboratories. Tray mats can be custom-cut with a sharp blade. Scraps can be recycled.

Blended with hydrophilic molecules to control the speed of dissipation, the ESD-Homogeneous material will deliver a typical resistance-to-ground measurement of 7x10e8 - 9 x 10e9 ohms per ANSI/ESD STM4.1.

The components used to manufacture this product are RoHS3 compliant and are not listed on the REACH SvHC list.

Rolls and cut mats are made in the U.S.A. and can be shipped under USMCA rules.

Ideal for the following applications:

• Liners for conductive trays
• Metal shelving in EPAs

Features:

• Single layer in two thicknesses: 0.09" (2.38 mm) & 0.06" (1.53mm)
• 7x10e8 - 9 x 10e9 ohms RTG, RTT, Vol R
• Can be custom-cut with sharp blade; scraps are recyclable
• Embossed finish reduces light glare and parts slippage
• Durable surface withstands solder, flux, and harsh chemicals
• Low outgassing and VOC are ideal for controlled environments
• UV additives to protect color and eliminate fading