|
Test-Um TP655 TestifierPRO™
Cable Tester w/ 8 Remote Identifiers
Click image to enlarge
Test-Um TP655
|
|
Features:
- Hub blink mode sends link pulses to network switch to blink port LED
- Measures cable length using patented cable capacitance method
- Displays single-ended test results in wiremap format for opens, shorts, and split pairs
- Tests and displays in wiremap format shorts, opens, miswires, reversals, and split pairs with remotes
- Two-line, 16-character, back-lit, full alphanumeric LCD with icon flags
- Auto-off and timed backlight in any mode for low power consumption and long battery life
|
Includes
- 30.48 cm (1 ft) RJ45 to alligator clips cable (TP40)
- Two 30.48 cm (1 ft) cable with RJ45 connectors (TP55)
- 30.48 cm (1 ft) coax cable (TG30)
- #1 coax remote identifier (TP65)
- Pouch
|
Description
|
The TestifierPRO™ Cable Tester provides telecom, datacom, and cable installers and technicians with cable test, length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO cable tester requires one-button operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax. An integrated remote bay houses a detachable test remote with built-in jacks for testing twisted pair cable terminated with RJ11 or RJ45 connectors.
The field-proven TestifierPRO performs detailed analysis to detect miswire, no connection, short, high-resistance fault, and split pair conditions when used with remote identifiers. It also tests and reports on shorts, opens, and split pairs conducted without a remote. The MAP ID function identifies multiple cables by displaying ID numbers of map-only remotes. TestifierPRO cable tester measures cable length and displays PASS icon for correctly wired T568A/B and six-pin cable. Tone generator mode sends any of four user-selectable tones on all pin and pair combinations.
Applications
- Installation, troubleshooting, and maintenance on telco, network, or coax cable
- Identify switch port LED where network cable is terminated
- Measure cable length
- Determine wiring condition
- Identify up to 20 telco, network, or coax cable runs at a time
- Find and fix position of exposed or hidden cable
|
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| TP655 |
TestifierPRO cable tester kit with remotes 1-8 |
| $299.00 |  |
|
| TP650 |
TestifierPRO cable tester |
| $225.00 | |
|
| Model |
Accessories |
List Price |
Sale Price |
| TG30 |
12" Coax Cable |
| $3.80 | |
|
| TP40 |
RJ45 to alligator clips cable - 12" |
| $5.41 | |
|
| TP55 |
Shielded cable with RJ45 connectors - 12" |
| $2.67 | |
|
| TP311 |
Set of 20 (120) coax ID-only remotes for cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper |
| $55.08 | |
|
| TP312 |
Set of 20 (1-20) RJ45 remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper |
| $33.03 | |
|
| TP314 |
Set of 20 (1-20) RJ11 remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper |
| $33.03 | |
|
| TP315 |
Set of 20 (1-20) two lead remote identifiers for or cable testers except Net-Rite, LanRoamer, LanRoamerPRO, and LanScaper |
| $69.95 | |
|
| KP420 |
Master Wiremapping Kit |
| $190.62 | |
|
Specifications
| Physical Dimensions |
| Size |
Excluding F-connector: 3.3 x 6.7 x 15.7 cm (1.3 x 2.6 x 6.2 in)
Including F-connector: 3.3 x 6.7 x 16.8 cm (1.3 x 2.6 x 6.6 in) |
| Weight |
235.3 g (8.3 oz) with battery and remote |
| Environmental |
| Operating temperature |
0 to 50°C (32 to 122°F) |
| Storage temperature |
–10 to 60°C (14 to 140°F) |
| Humidity |
10% to 90%, non-condensing |
| Battery life |
(based on a typical 9 V Alkaline battery) is for the full capacity of the battery used continuously in one of the following modes (batteries not included):
Standby: 2.5 yrs
Cable testing: 80 hrs (with backlight off) |
| Miscellaneous |
| Cable types |
Shielded or unshielded, CAT6, CAT5E, CAT5, CAT4, CAT3, and Coax |
| Minimum cable length for testing for split pairs |
0.91 m (3 ft) |
| Minimum cable |
length for PRETEST 1.22 m (4 ft) |
| Length measurement range |
(CAT5/6) 0 to 610 meters (0 to 2000 feet) |
| Coax cable |
100O maximum DC resistance, center conductor plus shield |
|
;)
