|
Simpson S662 Preset Batch/Dual Counter
Click image to enlarge
|
|
Features:
- Easily Programmed from the Front Panel
- Software Functions Include:
-Password
-Display Scaling
-Set Point Programming
-Decimal Point Selection
- Screw Terminal Connectors for Easy Installation
- Rugged, High-Impact Plastic Case Fits Standard 1/8 DIN Cutout
- 3.24” (82mm) for Restricted Space Behind Panel
- Remote Reset Capability
- Input Variety: Quadrature, Switch, TTL, CMOS, NAMUR, PNP,
NPN
|
Description
| The S662 is a multi-function counter that
can be easily configured to operate either in a dual mode or in
a totalizing/batch mode, each with separate scaling and reset functions.
When functioning in the dual mode, full direction control is maintained
for the totalizing and batch counts. In the totalizing batch mode,
the secondary value (batch count) is incremented after the primary
totalizing count has completed its cycle. The S662 is compactly
designed and features a standard 1/8 DIN case made of PBT-ABS alloy.
Screw terminals are standard for easy installation and removal of
the meter. The counter is powered from 120 or 240VAC and has a non-volatile
EEPROM to retain all programming and count information when the
power source is removed or interrupted. An optional 12VDC (100mA)
excitation output module can provide power for external sensors.
Optional field-replaceable single/dual relay modules enhance the
counter from a passive display device to an integral control element
for your application. This versatile counter has latching, boundary
or timed (0.01 to 599.99 seconds) output modes. |
Models, Options, & Accessories
| Model |
Description |
List Price |
Sale Price |
| S662 |
Preset Totalizer/Batch |
| Call |  |
|
| S660 |
Totalizer |
| Call | |
|
| S661 |
Rate Meter |
| Call | |
|
| S663 |
Preset Totalizer/Rate |
| Call | |
|
| S664 |
Frequency |
| Call | |
|
Ordering Options
Specifications
| DISPLAY |
| Type |
6-digit, 7-segment, red LED |
| Height |
0.56" (14.2mm) |
| Decimal Point |
User-programmable |
| Count Direction |
“+” indication implied, “-” indication displayed |
| Display Range |
-99,999 to +999,999 |
| Ouput Indicators |
1 and 2 |
| POWER REQUIREMENTS |
| AC Voltages |
120, 240VAC, ±10% |
| Power Consumption |
3VA |
| INPUT RATINGS |
| Current Sinking |
10K 5% Resistor pull-up to
(9.0 - 16VDC) ±10% |
| Current Sourcing |
5.1K 5% Resistor pulldown
to common |
| Minimum Pulse Width |
~5µs |
| Low Pass Filter |
<200Hz |
| Low Bias |
VLT = 1.6V ±10%
VUT = 3.6V ±10% |
| High Bias |
VLT = 5.0V ±10%
VUT = 7.0V ±10% |
| Count Rate |
20KHz (Pulse Max) 5KHz
(Quadrature X4 Max) |
| INPUT |
| User Input |
(Second channel reset) Count on the second
channel is reset when the User Input is pulled low. |
| Standard Input |
VLT <=0.2VDC guaranteed
low, VUT = 3.0VDC (max) |
| Quadrature Input |
VLT <= 0.9VDC
VUT =3.15VDC (max) |
| ENVIRONMENTAL |
| Operating Temp. |
0°C to +40 °C |
| Storage Temp. |
-10 °C to +60 °C |
| Relative Humidity |
0-80% for temperatures less than 32°C, decreasing
linearly to 50% at 40 °C |
| Ambient Temperature |
25°C |
| Temp. Coefficient (per °C) |
±100PPM/ °C |
| Warmup Time |
15 minutes |
| MECHANICAL |
| Bezel |
3.93" x 2.04" x .52" (99.8mm x 51.8mm x 13.2mm) |
| Depth |
3.24" (82.3mm) |
| Panel Cutout |
3.62" x 1.77" (92mm x 45mm) |
| Case Material |
PBT-ABS |
| Weight |
9oz (255.1g) |
|
;)
