| Output Characteristics |
| Frequency Range | Sine wave: 0.2 Hz to 20 MHz
Square & Triangle wave: 0.2 Hz to 10 MHz
Range selection in 8 ranges (1,10,100,1k,10k,100k,1M,10M ) |
| Output Level | 20 ±1 Vp-p in open circuit
10 ±0.5 Vp-p into 50W Load |
| Waveforms | Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square |
| Attenuator | 20dB fixed and continuously variable (20dB) |
| Impedance | 50W ±0.5% |
| Frequency Accuracy | ±5% of full scale |
| Waveform Characteristics |
| Sine Wave | Flatness: ±3dB to 20 MHz
Distortion: Less than 1.5 % at 0.2 Hz to 100 kHz
Duty error: Less than 10% in 50:50 |
| Square Wave | Rise and Fall Time : Less than 25 nS at 10MHz |
| Triangle Wave | Linearity: More than 99 % at 0.2 Hz to 100 kHz |
| TTL Output | Rise and Fall Time: Less than 25 nSec at 10MHz
TTL Level: H >= 2.4V, L <= 0.4V |
| Symmetry Variation | Sine & Square; 80:20 to 20:80 at 0.2Hz to 2MHz
Triangle; 80:20 to 20:80 at 0.2Hz to 1MHz |
| Sweep Function Characteristics |
| Mode | Linear |
| Width | Variable from 1:1 to 10:1 |
| Rate | 0.5 Hz to 50 Hz (20mS to 2S) |
| External VCF Input | Input Voltage: 0 to 10 V
Input Impedance: Approx. 10KW |
| Frequency Counter Characteristics |
| Display | 8 digits Green LED, Overflow, Gate time, MHz, kHz, Hz |
| Frequency Range | Input A : 0.1 Hz to 100 MHz, Input C : 80MHz to 3.0 GHz |
| Accuracy | ±Timebase Error ±1 count |
| Low pass Filter | -3 dB, 100kHz |
| Timebase | 10 MHz TCO, 1 ppm |
| Input Sensitivity | Input A: 30mVrms(0.1Hz to 80MHz), 70mVrms(80 to 100MHz)
Input C: 20mVrms(80MHz to 2.0GHz), 70mVrms(2.0GHz to 3.0GHz with RG58 cable), 40mVrms(2.0GHz to 3.0GHz with RG400 cable) |
| Max. Input Voltage | Input A: 35 Vp-p, Input C : 3Vrms |
| General Specifications |
| Power Requirement | 115 or 230 VAC ±10%, 48 to 66 Hz |
| Operating Temperature | 0 to 40°C (Accuracy specified at 23 ±5°C) |
| Size | 3.5" H x 9.5" W x 11.0" D |
| Weight | 6.6 lbs |
| Supplied Accessories | Manual, Line cord, BNC cable |