|
Megger Phasing Sequence Test Equipment
| Model |
Description or Specification |
 |
560060 Motor and Phase Rotation Tester
Input: 50 / 60 Hz; The Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Therefore, the test set eliminates the need for temporary connections that can be time consuming, costly and quite hazardous, particularly where many large, high-voltage motors are involved. |
|
|
560400 Motor and Phase Rotation Tester
Input: 25 / 50 / 60 / 400 Hz; The Motor and Phase Rotation Tester permits the electrical contractor or industrial maintenance electrician to permanently connect and tape the terminals of the motor being installed, without having to first energize the motor by a temporary hookup from a power source, if available, to determine motor rotation. Therefore, the test set eliminates the need for temporary connections that can be time consuming, costly and quite hazardous, particularly where many large, high-voltage motors are involved. |
 |
565250 Phase Sequence/Continuity Indicator Positive Identifier
The Phase Sequence/Continuity Indicator provides positive identification of phase sequence of energized lines and indicates which phase, if any, is faulty.
The phase sequence primary function, coupled with the related testing of phase continuity and faults, permits the electrical contractor or industrial maintenance electrician to be completely confident of the power supply. Phases can be labeled for proper connection at a later time or hooked up immediately with correct rotation assured. |
 |
830220-1 Cable Phasing Meter
The Model 830220-1 Cable Phasing Meter offers a safe and quick method of measuring voltage and determining phase rotation of underground distribution systems using the capacitance test point of elbow connectors. Most manufacturers of high-voltage cable terminators incorporate capacitance test points into their elbow connectors. These test points are designed for measuring purposes. |
 |
Megger 280282 Coating Thickness Gauge
The Tinsley Thickness Gauge is designed for measuring the dry-film thickness of any nonmagnetic material such as paint, plastic, etc., or plating such as zinc or chromium over a ferrous base (iron or steel).
The thickness gauge consists of a special lightweight magnet attached to a spring and contained within a pencil-like tube. |
|
;)
