Mark-10
Test Stand Comparison Chart

The following tables summarizes the technical characteristics of Mark-10 test stands in an easy-to-read comparison format. View a comparison of force gauges. Download the printable .pdf version of the Test Stands Comparison Chart.

Force Test Stands
	Force Capacity lb [N]	Max. Travel1 in [mm]	Loading Method	Travel Rate in [mm]	Daylight2 in [mm]	Included Accessories4
ESM	200 [1000]	13 [330]	Motorized	0.5-13 [13-300] / min	14 [356]3	Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate
ESMH	50 [250]	12 [305]	Motorized	0.2-50 [5-1270] / min	13 [330] (12 [305] w/optional travel display)
TSFM500 / TSFM500H	500 [2200]	4 [102]	Motorized	0.2 - 5.5 [5 - 140] / min	TSF/ TSFM500: 14 [356]3   TSFH / TSFM500H: 16.5 [419]3	Tool kit, sm. hook, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" and 3" compression plates, couplers (#10-32 and 5/16-18)
TSF / TSFH	1000 [5000]		Side-mounted hand wheel	0.013 [0.34] / wheel rev.
ES10/ES20	100 [500]	9 [229]	Lever	1.05 [26.7] / lever rev.	9 [229]	---
			Top-mounted hand wheel	0.06 [1.5] / wheel rev.
ES30	200 [1000]	13 [330]	Side-mounted hand wheel	0.05 [1.3] / wheel rev.	14 [356]3	Tool kit, ext. rod, sm. hook, med. hook, #10-32 coupler, 2" compression plate
TSA / TSAH	750 [3750]	w/stops: 2.75 [70] w/o stops: 6 [152]	Rack & pinion, lever can be positioned in 30° increments	3.00 [76.2] / lever rev.	TSA: 10.5 [267]3 TSAH: 14.5 [368]3	Tool kit, med. hook, lg. hook, 2" compression plate
TSB100	100 [500]	w/stops: 2.75 [70] w/o stops: 6 [152]	Rack & pinion, lever can be positioned in 30° increments	3.00 [76.2] / lever rev.	13 [330]	---
TSC / TSCH	1000 [5000]	3.5 [89]	Inline hand wheel	0.10 [25.4] / wheel rev.	TSC: 10 [254]3 TSCH: 13 [330]3	Tool kit, med. hook, lg. hook, extra lg. hook, 1/2-20F adapter plate, 2" compression plate
Torque Test Stands
	Torque Capacity lbin [Nm]	Max. Angular Travel, resolution	Loading Method	Rotation Rate in [mm]	Daylight2 (w/STJ torque sensor) in [mm]	Max. Slider Travel, Travel Rate6 in [mm]
TST / TSTH	100 [11.3]	∞, 2°	Side-mounted hand wheel	12° / wheel rev.	TST: 15 [381]3 TSTH: 16 [406]3	15.5 [394] 1.047 [26.6] / lever rev.
TSTM / TSTMH	100 [11.3]	∞, 2°	Motorized	0.3-8.6 RPM [4-52°/s]	TSTM: 13 [330]3 TSTMH: 16 [406]3	15.5 [394] 1.047 [26.6] / lever rev.

Advanced Motorized Force Test Stands
	Speed Range in/min [mm/min]	Programmable Travel Limits	Travel Display	Controller Features (Cycling, PC control, etc.)	PC Control	Limit Switches
ESM301 / ESM301L	0.02 - 45 [0.5 - 1100]	Yes	Internal, RS-232 output	Optional	Full	Included

Maximum travel depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures. The clearance between the bottom of a mounted force gauge or sensor and the loading surface of the stand. This distance will be less if grips or fixtures are used. The numbers in this chart are approximate. If your test sample size is very close to the daylight figure above (or daylight less grip(s) or fixture(s)), a column extension may be necessary. Longer columns available. All force test stands include force gauge mounting screws. All torque test stands include an adapter to secure the STJ torque sensor during testing. Adapters are also available for other torque sensors. The slider is intended for engaging and disengaging samples. The torque sensor adapter is mounted to the slider.

Mark-10 Main Page

Mark-10 Price List