| Generator Outputs |
|
Configuration: |
1 Y/C output, 2 composite outputs |
| Gain Error: |
Less than +/- 1% |
| Chroma/Luma Gain Error: |
Less than +/- 2% |
| Chroma/Luma Delay Error: |
Less than +/- 10 nsec |
| Frequency Response: |
Within +/- 3% to 5.8 MHz |
| Output Return Loss: |
Greater than 30 dB to 5 MHz |
| Subcarrier Frequency (int ref): |
NTSC: 3.579545 MHz +/- 50 Hz
PAL: 4.43361875 MHz +/- 50 Hz |
| SC/H Accuracy: |
Within +/- 10 degrees |
| Glenlock Input |
|
| Input Configuration: |
NTSC or 525 Y/C
PAL or 625 Y/C |
| Input Impedance: |
75 Ohm internal termination (no loop thru) |
| Return Loss: |
Greater than 36 dB to 5 MHz |
| Input Level Range: |
1 V p-p +/- dB |
| Input Signal to Noise Ratio: |
Greater than 35 dB |
| Burst Lock Range: |
NTSC: 3.579545 MHz +/- 200 Hz
PAL: 4.43361875 MHz +/- 200 Hz |
| Burst Lock Jitter: |
Less than 1 degree |
| Sync Lock Range: |
NTSC: 15.73426 kHz +/- 0.001%
PAL: 15.625 kHz +/- 0.001% |
| Sync Lock Jitter: |
Less than 10 nsec |
| Audio Tone Output |
|
| Configuration: |
One differential stereo channel |
| Frequency: |
1 kHz |
| Level: |
+4 dBm, balanced into 600 Ohms |
| Test Signals (PAL) |
|
| EBU 75% bars with CCIR ITS: |
75% saturation, full field color bars |
| EBU 100% bars with CCIR ITS: |
100% saturation, full field color bars |
| 75% bars / red with CCIR ITS: |
75% bars in split field with Red field |
| Red Field: |
Full Field 75% saturation red |
| CCIR 17 with CCIR ITS: |
White bar, 2T pulse, 20T mod pulse, 5 step |
| CCIR 18 with CCIR ITS: |
Multiburst at 0.5, 1.0, 2.0, 4.0, 4.8, & 5.8 MHz |
| CCIR 330 with CCIR ITS: |
Standard CCIR VITS test signals |
| CCIR 331 with CCIR ITS: |
Modulated pedestal and extended burst |
| Black Burst: |
0 V full field Black Burst |
| White: |
100% white bar, full field |
| Pludge |
4 levels white and +/- 2% black reference |
| Grille: |
Vertical and horizontal grid lines |
| CCIR ITS: |
Included with the CB and CCIR full field signals |
;)
;)
