| Model |
PEL151-501 |
PEL301-501 |
PEL601-501 |
PEL102-501 |
| Input Power |
0 to 150 W |
0 to 300 W |
0 to 600 W |
0 to 1000 W |
| Input Voltage Range |
CR Mode:0 to 500V, CC/CP/CV
Mode:5 to 500V |
| Input Current Range(Front/Rear
Terminal) |
0 to 7.5 A / 0 to 7.5 A |
0 to 15 A / 0 to 15 A |
0 to 30 A / 0 to 30 A |
0 to 30 A / 0 to 50 A |
| Constant Current Mode |
Range/Resolution |
H Range: 7.5 A: 0 to 7.5 A / 1 mA / 150
W max
L Range: 75 mA: 0 to 75 mA / 2.5 µA / 15 W max |
H Range: 15 A: 0 to 15 A / 2 mA / 300 W
max
L Range: 150 mA: 0 to 150 mA / 5 µA / 3 W max |
H Range: 30 A: 0 to 30 A / 4 mA / 600 W
max
L Range: 300 mA: 0 to 300 mA / 10 µA / 6 W max |
H Range: 50 A: 0 to 50 A / 5 mA / 1000 W
max
L Range: 500 mA: 0 to 500 mA / 20 µA / 10 W max |
| Accuracy |
±0.2% of SET ±0.3%
of FS (0 to 40°C) |
| Ripple Noise (1MHz) |
H Range 3 mA rms / L Range 0.5 mA rms |
H Range: 5 mA rms / L Range: 0.5 mA rms |
H Range: 5 mA rms / L Range: 0.5 mA rms |
H Range: 10 mA rms / L Range: 1 mA rms |
| Stability |
±0.1% of FS (typ) |
| Constant Resistance Mode |
Range |
H Range: OPEN, 20k Ohm to 0.6667m Ohm
L Range: OPEN, 2M Ohm to 66.67 Ohm |
H Range: OPEN, 10k Ohm to 0.3333 Ohm
L Range: OPEN, 1 M Ohm to 33.33 Ohm |
H Range: OPEN, 5 k Ohm to 166.67 m Ohm
L Range: OPEN, 500 k Ohm to 16.667 Ohm |
H Range: OPEN, 3.3333k Ohm to 111.11
m Ohm
L Range: OPEN, 333 k Ohm to 11.111 Ohm |
| Resolution |
H Range: 50 µs / L Range:0.5 µs |
H Range: 100 µs / L Range: 1 µs |
H Range: 200 µs / L Range: 2 µs |
H Range: 300 µs / L Range: 3 µs |
| Accuracy (23°C ±5°C) |
H Range: ±0.5% of SET ±37.5 mA
Vin/Rin
L Range: ±0.5% of SET ±0.375 mA Vin/Rin |
H Range: ±0.5% of SET ±75 mA Vin/Rin
L Range: ±0.5% of SET ±0.75 mA Vin/Rin |
H Range: ±0.5% of SET ±0.25 A
Vin/Rin
L Range: ±0.5% of SET ±1.5 mA Vin/Rin |
H Range: ±0.5% of SET ±0.25 A
Vin/Rin
L Range: ±0.5% of SET ±2.5 mA Vin/Rin |
| Ripple Noise (1MHz) |
H Range: 3 mA rms / L Range: 0.5 mA rms |
H Range: 5 mA rms / L Range: 0.5 mA rms |
H Range: 5 mA rms / L Range: 0.5 mA rms |
H Range: 10 mA rms / L Range: 1 mA rms |
| Temperature Factor |
1000PPM/°C (Vin=20 V) |
| Constant Voltage Mode |
50V Range/500V Range |
5 to 50 V/40 to 500 V (CC CV
Mode, CR CV Mode) |
| Accuracy/Resolution/Minimum Operating Current |
±0.1% of SET ±0.1%
of FS (0 to 40°C) / 50 V Range: 1 mV, 500 V Range: 10m
V / 1% of Constant Current |
| Constant Power Mode |
Operating Range/Resolution |
H Range: 1.5 to 150 W / 5 m W
L Range: 0.03 to 1.5 W / 50 µW |
H Range: 3 to 300 W / 10 mW
L Range: 0.06 to 3 W / 100 µW |
H Range: 6 to 600 W / 20m W
L Range: 0.12 to 6 W / 200 µW |
H Range: 10 to 1000 W / 25 mW
L Range: 0.2 to 10 W / 250 µW |
| Accuracy (23°C ±5°C) |
±0.4% SET ±1.6% FS
±Vin x Vin / Rin (Vin x Vin / Rin for Current L Range) (TEMP
factor: 1000PPM/ °C (Vin=20 V)) |
| Ripple Noise (1MHz) |
H Range : 3 mA rms / L Range : 0.5 mA rms |
H Range: 5 mA rms / L Range: 0.5 mA rms |
H Range : 5 mA rms / L Range : 0.5 mA rms |
H Range : 10 mA rms / L Range : 1 mA rms |
| Short Mode |
Setting Current Value |
0.075/7.5 A |
0.15/15 A |
0.3/30 A |
0.5/50 A |
| SW Mode (Preset A,B) |
Frequency/Accuracy |
1 Hz to 10kHz / ±1.5% SET |
| DUTY/Setting Accuracy/Resolution |
5% to 95% / ±1.5% of SET
/ 1% STEP |
| Through Rate Tr/Tf |
Operating Mode |
CC, CR |
| Setting Range |
CC:10 / 20 / 50 / 100 / 200
/ 500 / 1000 / 2000µs, CR:OFF / 200 / 500 / 1000 / 2000µs |
| Setting Accuracy |
H : 10, 20µs :-5µ
s : ±10µs, L:10, 20µ s : ±10µs,
H : 50 to 2000µs : ±20 %, L : 50 to 2000µs :
±30 % |
| Soft Start |
Operating Mode |
CC |
|
Setting Range/Accuracy |
0.1 / 1 / 2 / 5 / 10 / 20 /
50 / 100ms / ±30 % of set 100µs |
| Remote Sensing |
|
2.5 V par One Way |
| External Control |
Voltage |
0 to 10 V (Offset gain Adjustable
at Rear Panel. ) It takes approx. 1 Second for Settings at CR Mode |
| Resistance |
0 to 10k Ohm (It takes approx.
1 Second for Settings) |
| Others |
LOAD ON/OFF, EXT SW |
| Series/Parallel (Master/Slave
Operation) |
Connecting Capability |
Maximum 4 of Slave Units plus
1 Master Unit |
| Added Current Display |
Total Value of Slave Unit(s)
and Master Unit are Displayed at Master Unit Display. Over Write
: 2 times/Sec |
| Resolution (L Range/H Range) |
2 x N (mA) N: Parallel Unit
Numbers. |
| Current Monitor Out |
Linearity |
±1% FS |
| DC Current Measurement |
Range/ (Resolution) |
0.075 / 7.5 A / (0.02 mA/2 mA) |
0.15/15 A/(0.02 mA/2 mA) |
0.3 / 30 A / (0.02 mA/2 mA) |
0.5/50 A / (0.02 mA/2 mA) |
| Accuracy/Repeat |
±0.2% of rdg ±0.3%
of FS (0 to 40°C) / 2 Times/Sec |
| DC Voltage Measurement |
Range/Resolution |
0 to 50 V/1 mV, 40 to 525
V/10 mV (Auto Range, Hysteresis at 40/50 V) |
| Accuracy/Repeat/Temperature Factor |
50 V Range : ±0.03 % of
rdg ±0.06% of FS, 500 V Range : ±0.03% of rdg ±0.03%
of FS (18 to 28 °C) / 2 Times/Sec /
±0.003 % of rdg ±0.003 % of FS/ °C |
| Power Measurement |
Range/Resolution |
1.5, 150 W / 1, 100 mW (Voltage
x Current) |
3, 300 W / 1, 100 mW (Voltage x
Current) |
6, 600 W / 1, 100 mW (Voltage x
Current) |
10, 1000 W / 1, 100 mW (Voltage
x Current) |
| UVP (Under Voltage ) |
Range/Resolution |
OFF, -0.5 to 50 V/100 mV |
| OPP (Over Power) |
Range/Resolution |
H Range: 15 to 165W/1W / L Range: 0.15 to
1.65W/10mW |
H Range: 30 to 330W/2W / L Range: 0.3 to
3.3W/20mW |
H Range: 60 to 660 W/4 W / L Range: 0.6
to 6.6 W/40 mW |
H Range: 100 to 1100 W/5 W, L Range:
1 to 11 W/50 mW |
| OCP (Over Current) |
Setting Range/Resolution |
H Range: 0.75 to 8.25 A/37.5 mA
L Range: 7.5 to 82.5 A/0.375 mA |
H Range: 1.5 to 16.5 A/75 mA
L Range: 15 to 165 mA/0.75 mA |
H Range: 3 to 33 A/150 mA
L Range: 0.03 to 0.33 A/1.5 mA |
H Range: 5 to 55 A/250 mA
L Range: 0.05 to 0.55 A/2.5 mA |
| Protection |
Over Voltage |
Cut Load Off about 575 V |
| Over Current, Over Power |
Automatic Resume After 3 Sec
of Load Off |
| Reversed Connection |
Terminate by Parasitic FET |
| Over Heating |
Cut Load Off at 110 °C
at Inside Heat Sink |
| Sequence Memory |
Step/Time/Resolution |
100 / 50 µs to 99h59m59.99995
s, PAUSE, PASS / 50 µs, Cycle: 1 to 255 |
| Items |
Discharge Mode Pre-set A,
B and C Value, Pre-set A, B and C Switch Selection,
Discharge Mode, SHORT Mode
ON/OFF, LOAD ON/OFF, UVP Setting value, OCP Setting
value, OPP Setting Value, Soft Start Setting Value,
Tr/Tf
Setting value, SW Frequency, SW DUTY, CV RANGE,
Current RANGE, External Control Mode (PASS at Auto Sequence
Mode) |
| Environmental Request |
Temperature/Humidity |
0 to 40°C / 20 to 85 %RH |
| Power Source |
AC90 to 132 V / AC180 to 250V,
48 to 63 Hz |
| Power Consumption |
Less than 120 VA |
Less Than 130VA |
Less than 147VA |
Less Than 169VA |
| Isolation |
Primary to Body : 1500VAC 1
Minute, Primary to Secondary : 2300VAC 1 Minute |
| Isolation Resistance |
Primary to Body, Primary
to Secondary : 500VDC More Than 10M Ohm, Secondary to Body :
500 VDC More Than 5M Ohm |
| Cooling Method |
Cooling Fan |
| Dimensions (Maximum) |
W x H x D: 210 (210) x 124 (141)
x 405 (538) (mm) |
W x H x D: 421.5 (421.5) x 124
(132.5) x 405 (538) (mm) |
| Weight |
Approx. 6 kg |
Approx. 7 kg |
Approx. 11 kg |
Approx. 13 kg |
;)
