|
Fluke 718EX 100G
Intrinsically Safe Pressure Calibrator
| Fluke 718Ex 30G |
| Range |
-830 mbar to 2 bar (internal sensor) |
| Over pressure |
3x FS |
| Resolution |
0.0001 bar |
| Accuracy |
0.05% FS |
| Functions |
Zero, Min, Max, Hold, Damp |
| Note |
for use with non-corrosive gasses |
| Fluke 718Ex 100G |
| Range |
-830 mbar to 7 bar (internal sensor) |
| Over pressure |
2x FS |
| Resolution |
0.001 bar |
| Accuracy |
0.05% FS |
| Functions |
Zero, Min, Max, Hold, Damp |
| Note |
for use with non-corrosive gasses |
| Fluke 718Ex series via pressure module connector |
| Range |
29 pressure modules, 2.5 mbar to 700 bar
Over pressure per pressure module specs |
| Resolution |
Per pressure module specs |
| Accuracy |
To 0.025% of full span, per pressure module specs |
| Functions |
Zero, Min, Max, Hold, Damp |
| Note |
media compatibility per pressure module specs |
| Source Pressure, built in pump |
| Range |
-820 mbar to full scale |
| Note |
Supported Pressure Units PSI, in. H2O (4 °C), in. H2O (20 °C), kPa, cm H2O (4 °C), cm H2O (20 °C), bar, mbar, kg/cm², mmHg, in Hg |
| Measure Accuracy |
| Range |
0-24 mA |
| Resolution |
0.001 mA |
| Accuracy |
0.02% rdg ± 2 counts |
| Display |
| |
LCD, 5 digit pressure and current simultaneous |
| Operating Temperature |
-10ºC to 55ºC |
| Storage Temperature |
-40ºC to 60ºC |
Humidity
(Without Condensation) |
95% (10ºC to 30ºC)
75% (30ºC to 40ºC)
45% (40ºC to 50ºC)
35% (50ºC to 55ºC) |
| Operating Altitude |
3,000 m max |
| Safety |
ATEX II 1G EEx ia IIC T4 compliant
CSA Certification I.S. Class I,
Div 1 Groups A-D , T4 |
| Size |
216 mm L x 94 mm W x 66 mm H (with holster) |
| Weight |
Approx. 992 g (with holster) |
| Warranty |
1 year |
| Shock |
1 meter drop test |
| Vibration |
Random, 2 G, 5-500 Hz |
| Battery type |
One 9-volt alkaline battery ANSI/NEDA 1604A or IEC 6LR619V |
| Battery life |
4 to 20 hours, depending on functions used |
|
