200-2450

0 reviews | Model: 200-2450

Compare

CADET II Electronics Lab

Expanded Removeable breadboard area
Two open collector pulsers
Built-in multi-waveform function generator
Quad voltage power supply: Three DC & one low voltage AC
Functions with optional electronics trainer boards
Built-in logic probe with pulse capture
BCD to 7 segment decoder/display
8 channel logic indicatorsSpecifications

View Product Details

List Price: $850.00

In Stock:

View Payment Options

Recommended for you

Description

The C.A.D.E.T. II is a Complete Electronics Trainer that includes all the functions needed to teach basic AC/DC, Linear and Digital Electronics courses. The unit contains all the functions of our highly acclaimed original C.A.D.E.T. plus frequently requested features from educators worldwide.
The breadboard area is 33% larger than original C.A.D.E.T., holds up to 32 IC's and comes standard as a removable socket plate with velcro. If you prefer, it can be ordered withour bread boards for use with the extensive line of E&L Trainer Boards. The built-in logic probe will detect narrow logic pulses and eliminate the need for extra lab equipment. The BCD to 7 segment display/decoder saves students time when constucting circuits. The Quad Voltage Power Supply has +5 VDC, two variable DC outputs, and a fixed 12.6 VAC center tapped output. The trainer also includes 8 TTL compatible logic switches and two pulsers.

Manufacturer Specs

Frequency Generator
Frequency Range	0.1 Hz to 100 kHz in six ranges
Output voltage	0 to ±10V (20Vp-p)
Output Impedance	600 ohms (except TTL)
Output current	10mA maximum, short circuit protected
Output waveforms	Sine, Square, Triangle, TTL
Sine wave	distortion <3% (10Hz to 100kHz)
TTL pulse	rise and fall time <25 nS. drive to 10 TTL loads
Square wave	rise and fall time <1.5µS
Breadboarding Area
A total of 3360 uncommitted tie-points, available on velcro breadboard plate. Two QT-59B, bus strips. Fifty tie-points for each +5V, variable +15V, and ground if desired
Logic Indicators
16 LED’s 8 red to indicate logic high, 8 green to indicate a logic low
Potentiometers
One 1 K ohm, one 10 K ohm, all leads available and uncommitted
BCD to 7 Segment Display
2 BCD to 7 segment display circuits are provided including decoder/driver circuitry. Tie points: 5 per each unit
Switches
Two SPDT slide switches, all leads available and uncommitted
Speaker
0.25W, 8 ohms
Logic Probe
Built-in TTL/CMOS compatible logic probe. Captures fast single shot events and pulse trains. Input impedance 300K, overload protection +50VDC, min. detectable pulse width 100nsec. TTL threshold low +0.8V high +2.25V, CMOS threshold low +30%Vcc high +70%Vcc. Memory mode, latches on first transition and LED remains on until probe is reset
Logic Switches
8 individual SPDT logic switches, one side of all eight switches connected and switchable to +5V or ground, other side of all eight switches separate, and uncommitted
Debounced Push-Button (Pulsers)
Two push-button operated, open-collector output pulsers, each with one normally-open and one normally- closed output. Each output can sink up to 25mA
BNC Connectors
Two BNC connectors, pin available and uncommitted, shell connected to ground
Power
3-wire AC line input (117V, 60 Hz typical) with power-on indicator. Both Models are available in 220-240VAC@50Hz
Power Supplies
Fixed DC output	+5V@1.0A, ripple <5mV
Variable DC output	+1.3 V to +15V@0.5A, ripple <5mV -1.3 V to -15V@0.5A, ripple <5mV
Fixed AC output	12.6 VAC Center tapped @ 100mA
Weight
10 lbs. (4.5kg)
Overall Dimensions
4.5” (H) x 15” (W) x 10.75” (D) (11.4 x 38.1 x 27.3 cm)
Enclosure
Steel case