| Images |
 |
 |
 |
| Models |
2650A |
2652A |
2658A |
| Frequency section |
| Frequency range |
50 kHz to 3.3 GHz |
50 kHz to 8.5 GHz |
| Center frequency |
| Setting resolution |
20 kHz Settable with rotary encoder, numeric or function key |
| Accuracy |
within ± (30+20T) kHz±1 dot @frequency span: 200 kHz to 10 MHz, RBW 3 kHz, 23±5 °C
within ± (60+300T) kHz±1dot @frequency span: 20 MHz to max. frequency (3.3 GHz or 8.5 GHz), RBW 100 kHz, 23±5 °C
T: sweep time (s) |
| RBW frequency error |
within ±4 kHz @ 3 kHz, 10 kHz, 30 kHz
within 20% of RBW @ RBW: 100 kHz, 300 kHz
within 10% of RBW @ RBW: 1 MHz, 3 MHz |
| Frequency span |
| Range |
0 Hz (zero span), 200 kHz to 2 GHz (1-2-5 step) and 3.3 GHz (full span) |
0 Hz (zero span), 200 kHz to 2 GHz (1-2-5 step) and 8.5 GHz (Full span) |
| Accuracy |
within ±3% ±1dot @ sweep time of 0.3s, 23±5 °C |
| Display resolution # of points per trace |
501dots on LCD screen, 1001dots readout via PC (501 dots are visible on the display, 1001 dots of trace data are captured internally and can be transferred to a PC via USB device interface.) |
| Resolution bandwidth |
3 dB bandwidth (6 dB for 2651 @ 9 kHz, 120 kHz) |
| Range |
3 kHz to 3 MHz (1-3 sequence) and AUTO (2651: 3 kHz, 9 kHz, 30 kHz, 120 kHz, 300 kHz, 1 MHz, 3 MH |
| Accuracy |
±20% |
| Shape Factor |
1:12 (typical, 3 dB : 60 dB) |
| Video bandwidth |
100 Hz to 1 MHz (1-3 step) and AUTO |
| SSB phase noise |
-90 dBc/Hz (typical) @100 kHz offset, RBW : 3 kHz, VBW : 100 Hz, sweep time: 1 s |
| Spurious response |
less than -60 dBc |
| Harmonics |
less than -40 dBc @ = 100 MHz |
| Amplitude section |
| Reference level |
| Range |
+10 to -60 dBm (1dB step) |
| Accuracy |
within ± 0.8 dB ± 1 dot @ center frequency : 100 MHz, RBW : 3 MHz, VBW : 1 MHz, REF : -15 dBm, 23±5 °C |
| Unit |
dBm, dBV, dBmV, dBµV, dBµV/m, dBµA/m (dBµV/m and dBµA/m are used for measurement functions) |
| Average noise level |
-127 dBm (typical) @ CF : 1 GHz, RBW : 3 kHz, VBW : 100 Hz, Ref. level < - 40 dBm ( preamp automatically ON) |
| Frequency response |
within ±2.0 dB ± 1 dot @50 kHz to 100 MHz
within ±1.0 dB ± 1 dot @100 MHz to max. frequency (3.3 GHz or 8.5 GHz) |
| Input impedance |
50 Ω |
| Input VSWR |
< 2.0 |
| Input attenuator |
| Operating range |
0 to 25 dB (1 dB step), coupled with reference level |
| Switching error |
±0.6 dB @100 MHz |
| RBW switching error |
±0.6 dB |
| Display resolution (vertical) |
381 dots/10 div |
| Display scale |
| Scale |
10 dB/div, 5 dB/div, 2 dB/div |
| Accuracy |
±(0.2 dB+1dot)/2 dB ±(0.4 dB+1dot)/5 dB
±(0.8 dB+1dot)/10 dB ±(1.8 dB+1dot)/83 dB |
| Input damage level |
+27 dBm (CW average power), 25 VDC |
| Sweep section |
| Sweep time |
| Range (1-3 step) |
10 ms to 30 s and AUTO @frequency span : 0 to 2 GHz 30 ms to 30 s and AUTO @frequency span : full span |
10 ms to 30 s and AUTO @frequency span : 0 to 2 GHz 30 ms to 30 s and AUTO @frequency span : 5 GHz, full span |
| Accuracy |
Within ±0.1 %±1d @frequency span : 0 to 2 GHz within ±1.5 %±1dot @ full span |
Within ±0.1 %±1dot @frequency span : 0 to 5 GHz within ±2.5 %±1dot @ full span |
| Trigger |
| Trigger mode |
AUTO (Available only for zero span) |
| Trigger source |
Internal and External |
| External trigger |
| Input voltage range |
1 to 10 Vp-p |
| Frequency range |
DC to 5 MHz |
| Input coupling |
DC coupling |
| Trigger level |
approx. 0.56 V(fix) |
| Input RC |
approx. 10 kΩ / less than 15 pF |
| Input damage level |
±50 V(DC+AC peak) |
| Input connector |
SMA(J) |
| Detection mode |
Positive peak, Negative peak, Sample ( QP and AV for model 2651 only.) |
| Function |
| Marker measurement |
NORM:displays frequency (8 digits max) and level (4 digits max) at marker point.
DELTA:displays frequency difference and level difference between two markers. |
| Peak search |
NORM: searches peak point within 10div (full freq. range). This mode also supports NEXT peak ( up to 10).
ZONE: searches peak point within a zone designated by center and width. |
| Calculations |
NORM, MAX HOLD, MIN HOLD, AVERAGE, OVER WRITE MAX/MIN HOLD: 2 to 1024 AVERAGE: 2 to 256 |
| Measurements |
Measure Channel power, Adjacent channel leakage power, Occupied frequency bandwidth, Electric field strength (requires antenna), Magnetic field strength (requires magnetic field probe). |
| Auto tuning |
Automatically scans the full bandwidth, sets center frequency to the maximum signal within full span and centers it onscreen. Automatically adjusts reference level, RBW, VBW and sweep time to optimum values |
| Save/Load |
| Save |
Saves 200 reference spectrum measurements and 200 setups |
| Load |
Loads one reference spectrum measurement and one setup |
| General |
| RF Input connector |
N(J) connector |
| USB Communication |
| Protocol |
USB version 1.1 (will also work with USB 2.0 devices) |
| Device Connector |
B plug |
| Transfer rate |
12 Mbps |
| Hard copy |
USB printer (option) connected to A plug (host) enables hard copy of screen. |
| Host connector |
A plug |
| Display |
| Display |
5.7 inch color TFT LCD |
| Backlight |
LED backlight |
| Number of dots |
640(H) x 480(V) dots |
| Power supply |
| Dedicated |
Input : 100 to 240 VAC |
| AC adaptor |
Output : 9 VDC/2.6 A |
| Lithium-ion battery |
7.4 V/5000 mAh Li-Ion battery (MB400) |
| Charge function |
Capable of charging during power-off. Indicates 4 conditions with two color LED |
| Charge indicator |
5 level indicator of remaining battery charge |
| Environmental and Size |
| Operating temperature |
0 to 50° C (guaranteed at 23±10 °C, without soft carrying case) |
| Operating humidity |
less than 40 °C/80 %RH (guaranteed at less than 33 °C/70 %RH, without soft carrying case) |
| Storage temperature |
-20 to 60 °C, less than 60 °C/70 %RH |
| Dimensions |
6.38 (W) x 2.80 (H) x 10.43 (D) inch, 162(W) x 71(H) x 265(D) mm (excluding projections, protection bumper and stand) |
| Weight |
approx. 1.8 kg or 4 lbs (including battery) |
;)
