Battery life: 150 hours typical with carbon-zinc. 300 hours typical with alkaline.

Dimensions: 306 ? 135 ? 30mm (12 ? 5.3 ? 1.2 in).

Weight Approx.: 157g (1.26lb) including battery.

Safety: Designed to meet IEC 61010-1 (EN61010-1) and IEC 61010-2-032 (EN61010-2-032), CATIII 600V class II and pollution degree 2 indoor use comply with CE , UL

Ranges: 400mV, 4V, 40V, 400V, 600V

Resolution: 0.1mV

Accuracy: ?(0.5% rdg + 2 dgts)

Input Impedance: 400mV:100MO; 4V:10MO;40V~600V:9.1MO

Overload Protection: 600VDC or AC rms To measure millivolts, use ?RANGE ? button to manually select 400mV range.

Ranges: 4V, 40V, 400V, 600V

Resolution: 1mV

Accuracy: ?(1.2% rdg + 5 dgts)

 : ?(1.5% rdg + 5 dgts) on 600V range

Input Impedance: 4V:10MO;40V~600V:9.1MO

Overload Protection: 600 VDC or AC rms

Ranges: 40A , 400A

Resolution: 0.01A

Accuracy: ?(2.0% rdg + 6 dgts) 50 ~ 60Hz

Overload Protection: 400A AC

Ranges: 400O, 4kO, 40kO, 400kO, 4MO, 40MO

Resolution: 0.1O

Accuracy: ?(1.0% rdg + 4 dgts) on 400O to 400kO ranges

 : ?(1.5% rdg + 4 dgts) on 4MO range

 : ?(3.0% rdg + 5 dgts) on 40MO range

Open Circuit Volts: -0.45V dc typical, (-1.2Vdc on 400O range)

Overload Protection: 600VDC or AC rms

Ranges: 4uF , 40uF , 400uF , 4mF

Resolution: 1nF

Accuracy: ?(3.0% rdg + 15 dgts) on 4uF range

 : ?(3.0% rdg + 5 dgts) on 40uF to 400uF ranges

 : ?(5.0% rdg + 20 dgts) on 4mF range

Minimum Input Range: 100nF

Overload Protection: 600VDC or AC rms When the capacitor to be tested is conhected, if ?dsc? symbol indicates on LCD, it means there is voltage existing in the tested capacitor and need to be discharged before testing.

Range: -30?F ~ 400?F, -35?C ~ 400?C

Resolution: 0.1?F, 0.1?C

Accuracy: ?(1% + 2?F) -4?F ~ 400?F ?(1% + 1?C) 0?C ~ 200?C

 : ?(2% + 4?F) -30?F ~ -4?F ?(2% +3?C) -35?C ~ 0?C

Sensor Type: K-type themocouple

Overload Protection: 60VDC or 30VAC rms

Range: 400O

Resolution: 1O

Audible Indication: Less than 25O

Response Time: 500ms

Overload Protection: 500VDC or AC rms

Non-Contact Voltage Indicator: Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges.

Hold: Freeze the latest reading on the display.

Range: Excute manual range mode.

Disable Auto Power Off: Set the DMM to off position, press (RANGE) button, and hold the (RANGE) button while turning the rotary knob to the desired range position. Release the button when LCD displays normally. Note ?APO? annunciator is missing from the LCD. The Auto Power Off mode is activated with an ?APO? symbol indicating on LCD.