| WAVEFORM CHARACTERISTICS |
| Frequency Range |
1 µHz to 20 MHz |
| Amplitude Flatness |
(relative to 1 kHz)
< 100 kHz
100 kHz to 5 MHz
5 MHz to 20 MHz |
0.1 dB
0.15 dB
0.3 dB |
| Harmonic distortion |
| |
< 1 VPP |
≥ 1 VPP |
| DC to 20 kHz |
-70 dBc |
-70 dBc |
| 20 kHz to 100 kHz |
-65 dBc |
-60 dBc |
| 100 kHz to 1 MHz |
-50 dBc |
-45 dBc |
| 1 MHz to 20 MHz |
-40 dBc |
-35 dBc |
| Total harmonic distortion |
| DC to 20 kHz |
0.04% |
| Spurious (non-harmonic) |
| DC to 1 MHz |
-70 dBc |
| 1 MHz to 20 MHz |
-70 dBc + 6 dB/octave |
| Phase noise |
| (10 kHz offset) |
-115 dBc / Hz, typical |
| Frequency range |
1 µHz to 20 MHz |
| Rise/Fall time |
< 13 ns |
| Overshoot |
< 2% |
| Variable duty cycle |
20% to 80% (to 10 MHz)
40% to 60% (to 20 MHz) |
| Asymmetry (@ 50% duty) |
1% of period + 5 ns |
| Jitter (RMS) |
1 ns + 100 ppm of period |
| Frequency range |
1 µHz to 200 kHz |
| Linearity |
< 0.1% of peak output |
| Variable Symmetry |
0.0% to 100.0% |
| Frequency range |
500 µHz to 5 MHz |
Pulse width
(period ≤ 10s) |
20 ns minimum
10 ns resolution |
| Variable edge time |
< 13 ns to 100 ns |
| Overshoot |
< 2% |
| Jitter (RMS) |
300 ps + 0.1 ppm of period |
| Bandwidth |
10 MHz typical |
| Frequency range |
1 µHz to 6 MHz |
| Waveform length |
2 to 64 K points |
| Amplitude resolution |
14 bits (including sign) |
| Sample rate |
50 MSa/s |
| Min. Rise/Fall Time |
35 ns typical |
| Linearity |
< 0.1% of peak output |
| Settling Time |
< 250 ns to 0.5% of final value |
| Jitter (RMS) |
6 ns + 30 ppm |
| Non-volatile memory |
four waveforms |
| COMMON CHARACTERISTICS |
| Resolution |
1 µHz |
| Range |
10 mV PP to 10 VPP into 50Ω
20 mV PP to 20 V PP into open circuit |
| Accuracy (at 1 kHz) |
± 1% of setting ± 1 mV PP |
| Units |
V PP , V rms , dBm |
| Resolution |
4 digits |
| Range (peak AC + DC) |
± 5 V into 50Ω
± 10 V into open circuit |
| Accuracy |
± 2% of offset setting
± 0.5% of amplitude ± 2 mV |
| Resolution |
4 digits |
| Impedance |
50 Ω typical |
| Isolation |
42 Vpk maximum to earth |
| Protection |
Short-circuit protected, overload automatically disables main output |
| Accuracy |
± 10 ppm in 90 days
± 20 ppm in 1 year |
| Rear Panel Input |
| Lock Range |
10 MHz ± 500 Hz |
| Level |
100 mV PP to 5 V PP |
| Impedance |
1 kΩ typical, AC coupled |
| Lock Time |
< 2 seconds |
| Rear Panel Output |
| Frequency |
10 MHz |
| Level |
632 mV PP (0 dBm), typical |
| Impedance |
50 Ω typical, AC coupled |
| Phase Offset |
| Range |
+ 360° to - 360° |
| Resolution |
0.001° |
| Accuracy |
20 ns |
| GENERAL |
| Power Supply |
CAT II
100 - 240V @ 50/60Hz (-5%, +10%)
100 - 120V @ 400Hz (±10%) |
| Power Consumption |
50 VA max |
| Operating Environment |
IEC 61010
Pollution Degree 2
Indoor Location |
| Operating Temperature |
0°C to 55°C |
| Operating Humidity |
5% to 80% RH, non-condensing |
| Operating Altitude |
Up to 3000 meters |
| Storage Temperature |
-30°C to 70°C |
| State Storage Memory |
Power off state automatically saved.
Four user-configurable stored states |
| Interface |
USB, GPIB, and LAN standard |
| Language |
SCPI - 1993, IEEE-488.2 |
| Language |
SCPI - 1993, IEEE-488.2 |
| Dimensions (W x H x D) |
| Bench top |
261.1mm x 103.8mm x 303.2mm |
| Rack mount |
212.8mm x 88.3mm x 272.3mm |
| Weight |
3.4 kg (7.5 lbs) |
| Safety Designed to |
UL-1244, CSA 1010, EN61010 |
| EMC Tested to |
MIL-461C, EN55011, EN50082-1 |
| Vibration and Shock |
MIL-T-28800, Type III, Class 5 |
| Acoustic Noise |
30 dBa |
| Warm-up Time |
1 hour |
| Warranty |
1 year |